What People are Saying

“Impressed”

I did the engine flush today, the oil I put in for it came out as black as the old oil. Before, it was running down the road at 35-40 psi, idling at 25-30 psi oil pressure. Now since the flush and a new brand of oil, it runs down the road at 45-50 psi and idles about 40-45 psi, still has some blow-by but it will really tell when I put load behind it tomorrow morning. Can’t complain for a 950,000 mile 19 year old engine. It’s a 2000 W900L 12.7 Detroit, right around 954,000 miles on original engine. I can tell that it knocked the blow by down, I’m pretty impressed at what the (Flushing Oil) Concentrate can do, still ran at those psi’s loaded.

Shively LLC, OH

Heavy-duty Maxodyne zero-turn mower for professional lawn care.

"I can truly say has saved me money"

I want to thank you for putting out a product I can truly say has saved me money. I repair and sell Grasshopper Lawn mowers and love their Kubota Diesels and have had a few of them that have not been taken care of, but instead of having to tear them down and rebuild them, I added the FTC Decarbonizer and the Flushing Oil Concentrate, and was blown away with the results of my first application, before I put the additives in the one mower I truly thought I was going to have to take apart. I ran it for a month and during that time, I noticed less and less blow-by and it had the power to cut thick thatch with no problem. I just wanted to let you know what good products you have.

Rich M, Swansea, IL

Ross D

"A great product that does what it claims!"

The FTC Decarbonizer has worked well with my Nissan Caravan 3.0 ltr Diesel, the DPF used to clog and need a regen and reset every 3-4 months. I haven’t had to plug in and run the “clean’ since March 2020 (it’s now March 2021). Thanks Team, a great product that does what it claims!

Ross D. New Zealand

Doug C

"Fast Delivery!"

The well-packaged shipment from you arrived this morning – fast delivery! My slip neighbour and I both greatly appreciate your response and help with this matter – a class operation. I will help M… with his oil flush and we’ll start the Decarbonizer treatment.

Many thanks,

Douglas C, Victoria, BC, Canada

Solar-powered van with rooftop solar panels in a desert landscape.

"WOOWW!!!"

I imported this 2005 turbo-diesel VW California from Germany and just returned from 9,500 kilometers to Baja, Mexico. I found the FTC Decarbonizer cleaned up the engine and smoothed out the idle. I hadn’t used the AW10 Antiwear before, but my initial reaction is WWOOWW!!! The engine revs smoother, dead quiet – all that is advertised. I’ve not done a mileage comparison as yet, but the ease of the engine tells me it is rolling easier which can’t be a problem.

I’m looking forward to seeing the results from the diesel enhancer now.

Doug C. Canada

Detroit Series 60 revived

“My Series 60 had an inframe rebuild 300,000 miles ago, and blowby was starting to show up and it was starting to use oil. I tried some big name, off-the-shelf oil additives to try to stop the problem, but that didn’t help none. I found the Engine Blowby Pack online and gave it a shot. Followed the oil flush directions, and now the engine oil is still clean on the dipstick. That did a great job. I’ve been using the FTC Decarbonizer in the diesel, and I’ve only gone through about 250 gallons of diesel and already I can see an improvement. I could see the blowby in my lights at night, it looked like fog when I was parked up. Now I can hardly see it at all. Great improvement, I can see it’s working. Very happy with the result. I’ll get more when I finish what I ordered, just to keep her clean and running well.”

Ben G, TX

Cat Blowby

“Wanted to let you know that the FTC Decarbonizer did a great job with the blowby on my Cat 3116 engine. It was pretty bad, but the FTC Decarbonizer did a great job pretty quickly, now there’s only minimal blowby there. The engine runs great now too. Thanks for your help.”

Will H, Hagerstown, MD

FTC Decarbonizer

“My trucks love their “Kick-a-poo Joy Juice!” (FTC Decarbonizer) Maxxforce 5 and Cummins 5.9″

Alicia T, Edgerton, WI

Cummins ISX Blowby Eliminated

“The ISX had 200,000 miles on a rebuild and the blowby was bad, blowing oil out the tube. I got the Blowby Pack off you and started using the FTC Decarbonizer right away. Bit by bit I could see an improvement. I had to wait for a bit to do the oil flush because I’d only just changed the oil, but I did the flush at the next oil change. I noticed the blowby kept getting better, and now I have to say it’s eliminated. The engine is running very good too. The idea of getting your product was to avoid a rebuild, and it worked! I’m getting more of the products just to keep it clean and running strong.”

Ralph N, Houston, TX

Really great result

“My Cummins 5.9 had bad blowby and some heavy exhaust smoke. Annual emissions test was due, and I was sure it wouldn’t pass the way it was. It doesn’t have high mileage, but I knew it had not had enough oil changes during it’s life. I took my chances and got the Blowby Pack from you and did the oil flush first. The oil that came out looked horrible. I started using the Decarbonizer and within a week or two it had settled down, it passed emissions easily. A really good result!  Here’s something interesting, I had left the old oil in a drain bucket under cover for  few weeks before getting rid of it. When I looked at it just before I got rid of it, it looked like black pitch paint – so thick and almost sticky. That’s what came out of the engine! The dipstick still shows clean oil even nowVery pleased with the result.”

Greg M. Boston, MA

Difference was like Night & Day!

“The Engine Blowby Pack worked as it was supposed to. The Cummins ISL 425 in our motorhome had developed bad blowby, and so much oil spray coming from the blowby tube it was covering the tow car with oil. The dealer checked and told us that it showed 50% idling hours during it’s life so far. We flushed the oil the way you said with the Flushing Oil Concentrate, and started using the FTC Decarbonizer in the diesel. It started to get better quickly, and now we’ve run 700 gallons of diesel through it and the blowby is completely gone! The difference was like night and day! An excellent result. We were skeptical to begin with, having been told that the only way to fix the problem was to overhaul the engine. We couldn’t be happier with the results. We’ll keep using the products to keep it running so good. Many thanks.”

Patrick T, NE

Products actually work

“First off, this business is awesome! There aren’t many companies that thank you with a hand written letter. I have used some of their additives for several years now and I have to say they actually work and make a noticeable difference. I have always been skeptical of additives in anything other than gas/diesel fuels. With that said I still believe a lot of additives on the market are a waste of money except the ones from Maxodyne. I have used the AW-10 Antiwear and the ULS Diesel Enhancer (and now about to add the FTC Decarbonizer to the list) and they made a noticeable difference! I am an Amsoil dealer and in my opinion the Amsoil is more than enough to keep an engine clean and running great, but the AW-10 Antiwear made a huge difference with the Amsoil in my 6.7L Powerstroke as well as my wife’s Explorer with the Eco-boost. Thanks again!”

Ryan J, Lake View, AL

Corvette Blowby

'91 Corvette
… blowby pressure reduced a significant amount, the dipstick didn’t budge at all…”

“A friend bought this 1991 Corvette recently. It’s only got 139,000 miles on it, but it obviously had a bad maintenance history. It was still running great though and had good power, but the engine blowby was very bad. The pressure in the crankcase was enough to blow the dipstick out and oil was literally pumping from the tube. We did a leak down test and every cylinder had 20% or more drop. I followed the directions for using the Flushing Oil Concentrate, the oil came out looking very brown for brand new oil. The blowby pressure reduced a significant amount, the dipstick didn’t budge at all, and when I take the dipstick out now, there’s only a small amount of pressure there. The amazing thing was I did another leak down test immediately after the flush, and now it’s around 10% – 12%. We’re going to get the FTC Decarbonizer in the gas tank now and expect to see the blowby decrease even further as the rings and cylinders clean up. Very happy with the result!”

Dave D, Belleville, MI

Duramax Blowby

2003 Silverado Duramax
… within a couple days the blowby has reduced by about a half…”

“My 2003 Silverado Duramax had lots of blowby. It’s only got 242,000 miles, mostly pulling a 5th wheeler around, power was still good. I got your Blowby Pack and got the oil flush done. Before using the Flushing Oil Concentrate when I was stopped at traffic lights, I could see blowby coming out each side of the truck. Now within a couple days the blowby has reduced by about a half, definitely a lot less blowby smoke, I’ve got to get down and look under the truck to see, and now there’s only a little bit coming out. I think the more I drive it now using the FTC Decarbonizer in the fuel will probably fix the last of the blowby. Good products.”

Bert G, Bellingham, WA

Paccar DPF Regen problem

“Our 2012 Kenworth with the Paccar engine was really having a major problem with DPF Regens. The engine has around 500,000 miles. It was doing a forced regen around twice a week, and the light was constantly on a lot of the time. We started using the FTC Decarbonizer and within a couple weeks we noticed things were improving. The check light hadn’t come on in over a week or more, and now 3 weeks later it completely stopped with the forced regens. And we’ve noticed the engine seems to be running smoother and stronger. From what we’re seeing, this stuff works. Thanks.”

Will M, Leland, NC

Much quieter diesel engine

Diesel Toyota Land Cruiser
“… I noticed that the motor was more quiet… a big difference in power...”

“I finally got to put the ULS Diesel Enhancer in my Toyota Land Cruiser. It has around 252,000 miles and yesterday when I first put it in the tank I did not notice any difference, but today when I started it I noticed that the motor was more quiet than it usually is at first start. And my friend who used it also in his diesel Land Cruiser found a big difference in power and also said his is also a much more quiet motor.”

Johannes G. Iceland, Europe

Cummins ISX Burning Oil

“My Peterbilt 389 with the ISX-15 was burning tons of oil and had bad blowby. It’s got around 500,000 miles on it. I was going through about 3 gallons of oil every 1400 miles. So I started using the FTC Decarbonizer I got from you, hoping I wouldn’t have to get a rebuild. Within about a month the blowby had slowed down a lot! And the oil burning is right down too, now I only need to take 1 gallon of oil with me instead of 3 or 4 gallons. I’m confident that will improve more as I keep using the FTC Decarbonizer. I’ll use the Flushing Oil Concentrate in about 3,000 miles when the oil change is due. Hoping that’ll tidy up the last of the oil burning. Thanks for your help.”

Steve B. San Diego, CA

Detroit 60 Series Blow-by fix

“My Series 60 Detroit developed an oil use and blowby problem at 500,000kms (310,000 miles) after an in-chassis rebuild. Running your Flushing Oil Concentrate (in combination with FTC Decarbonizer) tightened up the blowby and oil burning. I’ve continued to use these products and 6-7 years later, the truck is still going great.”

Phil Riseley, Riseley’s Bulk Haulage, Australia

Black smoke and blowby Cummins 5.9

“We got the Blowby Pack to see if it would help our 2003 Dodge Cummins 5.9 24 valve engine. It’s got 300,000 miles on it and it’s been having some pretty bad blowby happening, as well as a lot of black exhaust smoke. We used  the oil flush treatment, and have been running the FTC Decarbonizer in the fuel. We’ve only done just over 100 miles and already we’re seeing an improvement. The black exhaust smoke has completely stopped, it’s running so much smoother, power feels to be up from before, and the blowby seems to be starting to slow down. I think that may take a bit more time yet. I honestly thought the engine was in really bad shape and was heading for a full rebuild – $8000. We’re really happy with the results. These products seem to be doing as you say they will. We’ll get some more soon for our daughter’s 2003 Ford Powermax. Thanks, a great product.”

Arnold H. Lubbock, TX

Diesel BMW in California

“…I’ve noticed some major improvements in the carI told my brother to get some for his car!…”

“I bought the FTC Decarbonizer for my 2009 BMW X5 Diesel mainly to help it with California’s emission rules. It only had 82,000 miles but wasn’t passing emissions. It also had a DPF problem, it was having to do forced regenerations far too frequently. I’d like to tell you that since I’ve been using the FTC Decarbonizer I’ve noticed some major improvements in the car. It now idles totally quietly (none of that usual BMW Diesel engine rattle), the MPG has greatly improved, and the regenerations have significantly decreased. It now runs like a different car. I told my brother to get some for his diesel car!

Matt V, West Hollywood, CA

DPF Problem Solved

“…a great product that does what it claims!…”

“The FTC Decarbonizer has worked well with my Nissan Caravan 3.0 Ltr Diesel, the DPF used to clog and need a regen and reset every 3-4 months. I haven’t had to plug in and run the “clean’ since March 2020 (it’s now March 2021). Thanks Team, a great product that does what it claims!”

Ross D. New Zealand

Detroit 60 Series Blow-by fix

“My Series 60 Detroit developed an oil use and blowby problem at 500,000kms (310,000 miles) after an in-chassis rebuild. Running your Flushing Oil Concentrate (in combination with FTC Decarbonizer) tightened up the blowby and oil burning. I’ve continued to use these products and 6-7 years later, the truck is still going great.”

Phil Riseley, Riseley’s Bulk Haulage, Australia

Chevy Astro low oil pressure

“… Awesome product, awesome result!…”
“… I couldn’t be happier with the result!…”

“Our old, yet mostly reliable 1997 Astro van has had a progressively worsening
low oil pressure problem for a long time. At idle, oil pressure sat around 30psi, and at higher RPM, it could only manage just over 40psi. Highly recommended by a friend, I did the engine flush with Flushing Oil Concentrate. The very first start with new oil, and immediately the oil pressure at idle was 55psi. At highway RPM it now sits solidly on 60psi. I couldn’t be happier with the result! Awesome product, awesome result. Thanks.”

Nathan A, San Francisco, CA

Really exceeded my expectations

“The products (Flushing Oil Concentrate & FTC Decarbonizer) worked great, really exceeded my expectations. Hopefully the longer they run, the better they will get. I just placed another order today for one of my hotshot drivers. Thanks for everything.”

David L, Tyler, TX

Amazing stuff

“I want to let you know, this stuff is amazing! I bought an old Dodge Ram with the 5.9 Cummins engine, about 200,000 miles on the clock. It was very low on power, clouds of exhaust smoke, and had lots of blow-by. I got the FTC Decarbonizer from you and added it to the fuel. Seriously, within about 2 hours of driving, I could tell the power had improved noticeably, and the blow-by had reduced significantly. I was shocked at how well it worked! Now I’ve done about 1500 miles, and the exhaust smoke has completely disappeared, and it’s running much smoother! I’m getting the Flushing Oil Concentrate from you now to finish the job right.”

William M, Menifee, CA