Cleanpower

Cleanpower is the remarkably effective, heavy duty complete fuel system and injector cleaner.
Most injectors don’t need replacing … Just a thorough clean. Cleanpower does that!

  • Effectively clean fuel injectors, fuel pumps & carburetors
  • Maximize fuel efficiency & power
  • Decrease exhaust smoke
  • Easier starting – hot & cold
  • Smooth engine operation at idle to full RPM’s
  • 8 fl oz treats up to 500 gallons of fuel
  • Concentrated formula for low treat-cost
  • Detergent based – no corrosive or abrasive solvents

32 fl oz treats 2000 Gallons or 7600 Liters of gasoline or diesel fuel!

Cleanpower, the ultimate in cleaning complete fuel systems, effectively removes fouling deposits in fuel injectors, even stubborn ones, that most “off the shelf” products won’t touch.

Cleanpower Fuel Treatment fuel injector cleaner – use it to restore power, fuel efficiency and driving quality in all engines.

Super Concentrated Cleanpower Fuel Treatment fuel injector cleaner is used to restore power, fuel efficiency and driving quality in all engines.

It is an extremely effective, heavy duty GASOLINE INJECTOR CLEANER – all fuel injected, carburettor, 4 stroke or 2 stroke engines, and is also an exceptionally effective DIESEL INJECTOR CLEANER – all 2 stroke and 4 stroke diesels.

Incomplete Combustion Causes Many Engine Problems

The combustion chamber of an Internal Combustion Engine is an incredibly volatile environment. Temperatures can be around 1200°F, and pressures can be around 800 PSI. Enormous fuel-generated explosions occur anywhere between 10 and 110+ times per second. Everything has to work just right – or problems can easily begin and continue to get worse over time.

Fuel injectors showing abnormal and correct spray patterns

Fouled fuel injectors cause poor performance and reduced fuel efficiency

A problem that very often occurs is fouled fuel injectors. This is usually always caused by deposits from incomplete combustion of the fuel. It is a circular effect – incomplete combustion produces residual deposits in the combustion chamber, these deposits adhere to the injector tip, the dirty fuel injector then creates an abnormal fuel spray pattern, which causes an even worse combustion process, increasing the amount of residual deposits.

Poor Gas Mileage, Low Power, Hard To Start

As these deposits build up on your fuel injectors, they will no longer function as they should, and the fuel injection spray pattern will be adversly affected. The fuel becomes more difficult to ignite and burns less efficiently causing problems such as poor fuel mileage, harder starts, less power, and higher harmful emissions.

Deposits also form on pistons, valves, cylinder head and turbocharger. Piston rings become stuck in their grooves, causing oil consumption to increase, and creating further (oil related) deposits. Hard deposits form on the back of valves and on the valve seat area. Valve failure can result. Wear increases on all critical components. In short, the wear rate of the engine is dramatically accelerated!

Cleanpower – Low Cost Solution to Fuel Injector Problems

Cleanpower – the ultimate in cleaning complete fuel systems. Detergent based (not corrosive and abrasive solvents), it effectively removes fouling deposits in fuel injectors, even stubborn ones, that most “off the shelf” products won’t touch. It eliminates rough idle and provides smoother operation throughout the full rev-range. It contains an upper cylinder lubricant to keep cylinders and pistons cooler and reduce wear. Cleanpower is a super-concentrated formula, making it an extremely low cost solution to many fuel injection problems – both gasoline and diesel. 8 fl oz treats up to 500 gallons (1900 liters) of fuel!

FAQ: Can I use Cleanpower and FTC Decarbonizer at the same time?
Yes! It’s a great idea to use Cleanpower and FTC Decarbonizer together! They do different jobs, yet they work remarkably well together in overcoming many potentially costly engine problems – excessive exhaust smoke, engine blow-by, low performance/fuel mileage, etc.