Engine Blowby Pack Reviews

“I got the Engine Blowby Pack about a year or so ago for my 1975 Mack. It worked pretty good. The blowby stopped and the other problems got better quickly too. For an old engine, it tidied up pretty good. One thing that stuck out was how after using the oil flush concentrate the engine oil stayed clean for…

“Got the Blowby Pack a few months ago for my 60 Series Detroit, and did the engine oil flush soon after. I think its incredible how much sludge and other material the flush got out. I kept a sample of the original oil, then compared it to the oil that came out 45 minutes later (the flush treated oil),…

“I have a Detroit Series 60 Marine diesel that had a glazing problem resulting in oil blowby 2100 hours after a rebuild. I grabbed the Blowby Pack from you and started using the FTC Decarbonizer immediately. Soon after, I did an oil flush using the Flushing Oil Concentrate.  Here’s the results – after 25 hours of use the engine oil is still clean and…

“My Cummins ISX, had around 700,000 miles on it. It had blowby, was using a lot of oil, and also DPF problems too – lots of forced regens needed far too often.I’d been hearing lots of good about these products, been told they are much better than other products out there. So I got the Blowby…

“We got the Blowby pack for the Cummins ISB 6.7 in our 2007 Kenworth box truck with only 200,000 miles. It’s an around town truck, and does not do any hard work. It had pretty bad blowby and power was right down. We did the oil flush using the concentrate, and can say that the engine oil is still…

“I did the oil flush on the truck and I’ve done a round trip with the FTC Decarbonizer and the blowby is much better already. I’ll keep running it, it works.” Rob C, Davenport, FL

“I got the Engine Blowby Pack from you a while ago, sorry it’s taken so long to get back to you, but just knew I had to let you know. Used the Flushing Oil Concentrate as you told me to, so much sludge and black stuff came out. Wow! After 45 minutes of running the flush, the new oil came out…

“My Series 60 had an inframe rebuild 300,000 miles ago, and blowby was starting to show up and it was starting to use oil. I tried some big name, off-the-shelf oil additives to try to stop the problem, but that didn’t help none. I found the Engine Blowby Pack online and gave it a shot. Followed the oil flush directions, and…

“The ISX had 200,000 miles on a rebuild and the blowby was bad, blowing oil out the tube. I got the Blowby Pack off you and started using the FTC Decarbonizer right away. Bit by bit I could see an improvement. I had to wait for a bit to do the oil flush because I’d only just changed the oil, but I…

“My Cummins 5.9 had bad blowby and some heavy exhaust smoke. Annual emissions test was due, and I was sure it wouldn’t pass the way it was. It doesn’t have high mileage, but I knew it had not had enough oil changes during it’s life. I took my chances and got the Blowby Pack from you and did the oil…