Cleanpower FAQ
What have you got to improve fuel stored for a long time?
The fuel additive products, Cleanpower and ULS Diesel Enhancer, both improve fuel stored for a long time as they reduce fuel oxidization and degradation, as well as resultant fuel system fouling. In addition, FTC Decarbonizer can also be added to assist in burning aged gasoline and diesel cleanly, along with protecting against diesel bug! Find out…
Read MoreWill any of your fuel products settle out from the fuel?
No. Our fuel treatments/additives all mix easily and will not settle out from the fuel, even over prolonged periods. In addition, FTC Decarbonizer and Marine Diesel Stabilizer control microbial fuel growths in fuel, subsequently prolonging the life of the fuel to which it is added. As a fuel catalyst, FTC Decarbonizer enhances the combustion process…
Read MoreAre your products suitable for new vehicles?
Yes! These products are suitable and recommended for new vehicles. The sooner they are used, the sooner they start protecting your vehicles, and the longer they’ll last and stay at peak performance and efficiency. Generally, start using AW10 Antiwear after the first oil change in engines to allow some initial bed-in to occur. For all other components, AW10…
Read MoreWhat happens if overdosing occurs?
These products are highly concentrated liquids; exceeding the recommended dosage is unnecessary. Here is general information about each product… FTC Decarbonizer: No concerns with overdosing. Flushing Oil Concentrate: No concerns with overdosing. ULS Diesel Enhancer: If severe overdosing occurs, there is minimal risk of any engine fault. There is a slight possibility of a little…
Read MoreCan I use FTC Decarbonizer and Cleanpower (or ULS Diesel Enhancer) together?
Yes! It’s a great idea to use FTC Decarbonizer and Cleanpower (or ULS Diesel Enhancer) together! They do different jobs, yet they work remarkably well together in overcoming many potentially costly engine problems – excessive exhaust smoke, engine blow-by, low performance/fuel mileage, etc. ULS Diesel Enhancer is a diesel-only formulation; not to be used in…
Read MoreWhat does exhaust smoke tell me about my engine?
The color of engine exhaust smoke and when it occurs can tell you a lot about your engine’s condition. Basically, there are three types of exhaust smoke – black exhaust smoke, blue exhaust smoke, and white exhaust smoke. Though each type of exhaust smoke has a story to tell, visible exhaust smoke is an indication…
Read MoreWhat causes white smoke when I start my diesel engine?
Maxodyne Stop Smoke Gasoline Pack Maxodyne Stop Smoke Diesel Pack White smoke is caused by unburnt diesel fuel leaving the combustion chamber and entering the exhaust system. When white smoke occurs at cold start and then disappears as the engine warms up, the most common causes are fouling deposits around piston rings and/or cylinder glazing.…
Read MoreIs there a cost effective way to stop exhaust smoke?
Maxodyne Stop Smoke Gasoline Pack Maxodyne Stop Smoke Diesel Pack Exhaust smoke is an engine symptom to be concerned about. It indicates that an engine is not running right, and its service life is likely to be shortened considerably unless something is done to address the problem. The important thing to do is to see…
Read MoreWhat does Cleanpower do?
Cleanpower is a super-concentrated full fuel system cleaner and conditioner – cleaning fuel lines, pumps, and most importantly, INJECTORS! Designed for both gasoline and diesel engines, Cleanpower solves many poor performance, low gas mileage and emission problems of today’s modern engines. It is completely safe to use and will not harm any delicate fuel injection…
Read MoreWhat causes decreasing fuel mileage from my engine?
One of the main causes of decreasing fuel economy/gas mileage and sluggish performance from modern engines is fouled fuel injectors – both gasoline and diesel. By adding Cleanpower Fuel Treatment and Fuel Injector Cleaner to the fuel tank, either gasoline or diesel, with its extremely effective detergents and dispersants (not corrosive and abrasive solvents), it…
Read More