AW10 Antiwear FAQ
Are your products suitable for new vehicles?
Yes! These products are suitable and recommended for new vehicles. The sooner they are used, the sooner they start protecting your vehicles, and the longer they’ll last and stay at peak performance and efficiency. Generally, start using AW10 Antiwear after the first oil change in engines to allow some initial bed-in to occur. For all other components, AW10…
Read MoreWhat happens if overdosing occurs?
These products are highly concentrated liquids; exceeding the recommended dosage is unnecessary. Here is general information about each product… FTC Decarbonizer: No concerns with overdosing. Flushing Oil Concentrate: No concerns with overdosing. ULS Diesel Enhancer: If severe overdosing occurs, there is minimal risk of any engine fault. There is a slight possibility of a little…
Read MoreCan I use AW10 Antiwear in an automatic transmission?
Yes, AW10 Antiwear is totally suitable and recommended for use in automatic transmissions. It strengthens the transmission fluid to greatly reduce component wear, as well as reducing operational heat generation. An extremely effective and low-cost way to boost your automatic transmission’s performance and reliability. Find out more… Find Out More! Incredible improvement “I got the…
Read MoreWhat causes lubricating oil to wear out?
Oil wears out, or, more technically, ‘breaks down’ when the internal heat of an engine, transmission or driveline etc, causes a chemical reaction in the lubricating oil, which causes the oil’s viscosity to change. Simply, when an engine, transmission or hydraulic system heats up beyond a certain temperature threshold, the lubricating oil will begin to…
Read MoreHow can I reduce the heat coming from my transmission?
Transmission heat is generated from 2 sources. Firstly, frictional heat occurs when the oil film is ruptured allowing metal-to-metal contact. Secondly, heat is generated through fluid friction caused by the constant churning of the oil during operation. AW10 Antiwear is formulated to deliver tremendous improvement in lubricant load carrying ability, wear reduction, and friction and…
Read MoreHow to increase oil’s load carrying strength without changing viscosity
Increase the load carrying capacity of your oil, whether it be engine, transmission, final drive or hydraulic oil. AW10 Antiwear multiplies the oil’s load carrying ability without increasing its viscosity (or drag). This Oil Enhancer carries a much higher load than the oil itself is capable of; making every lubricated part more protected, efficient and…
Read MoreWhat does AW10 Antiwear do?
AW10 Antiwear is an extremely powerful anti-friction, anti-wear treatment for engine, gearbox and transmission, differential and hydraulic oils. It also provides excellent anti-rust protection. It may not be suitable for ‘low pressure’ wet clutch and some small wet brake applications, i.e. motorcycle wet clutches, ATV wet brake systems etc. Extend the life of your vehicle…
Read More