Skip to content
Posts Tagged ‘engine rebuild’
What causes engine blow-by, and can you fix it without rebuilding the engine?
Most of the time, yes. Blow-by is a serious mechanical problem, and if you let it go long enough it gets much worse. But in the majority of cases the root cause isn’t worn rings. It’s carbon. Hard carbon deposits that have built up in the compression ring grooves and on the cylinder walls are…
Read MoreExcessive Engine Oil Use
Whether it is a gasoline or diesel engine, excessive engine oil use is caused by either leaking seals and/or gaskets, or otherwise, the oil is being consumed in the combustion chamber during engine operation. When oil is combusted, excessive carbon particulate matter is produced, forming harmful carbon deposits within the combustion chamber and on associated components. Over time, these encrusted…
Read MoreDoes FTC Decarbonizer Really Work?
To answer the question “Does FTC Decarbonizer really work?“, take a look at these photos – This photo is of a cylinder from a Caterpillar 3508 diesel engine at 8,000 hours. It was used in an earthmoving machine in a large mining operation in Australia. It was torn down and rebuilt prior to the normal…
Read MoreOil Soot, Carbon, & Blow-by Issues
Sooty engine oil, carbon deposits, & blow-by issues Regular diesel engine operation, including starting, becomes increasingly problematic as combustion-related deposits build up on critical engine components over time. Cold weather only compounds the situation. Types of operation, such as excessive idling, short run time, light work, and city type driving, all contribute to carbon and…
Read More