FAQs
Below are some of our most frequently asked questions. Choose an FAQ category with the buttons below. If you can’t find answers to your questions here, please contact us.
- FTC Decarbonizer
- Flushing Oil Concentrate
- ULS Diesel Enhancer
- Cleanpower
- AW10 Antiwear
- RMI-25 Cooling System Treatment
- How Much Do I Need
- Which Value Pack do I need
A unique and remarkably effective fuel combustion catalyst for both diesel and gasoline engines, FTC Decarbonizer effectively and safely burns off (oxidizes) hard baked-on carbon from combustion and exhaust spaces. Perfect for unsticking compression rings and deglazing engines as they operate, de-coking turbochargers, Exhaust Gas Recirculation valves (EGR) and Diesel Particulate Filters (DPF), reducing emissions, stopping smoke and restoring power! It also destroys diesel bug. Find out more…
Cleanpower
is a super-concentrated full fuel system cleaner and conditioner – cleaning fuel lines, pumps, and most importantly, INJECTORS! Designed for both gasoline and diesel engines, Cleanpower solves many performance, low gas mileage and emission problems of today’s modern engines. It is completely safe to use and will not harm any delicate fuel injection components, as many “off-the-shelf” solvent-based fuel treatments do. Restore engine power, performance and economy in a very low cost way. Find out more…
ULS Diesel Enhancer
is an extremely safe and highly effective, heavy duty, complete diesel fuel system cleaner and conditioner. It thoroughly cleans, lubricates and protects High Pressure Injection diesel fuel systems (CRDi, HPCR and HEUI) running today’s Ultra-low Sulfur Diesel. Not only does it clean and restore failing injectors, it also boosts diesel fuel lubricity – saving High Pressure Injection diesel engines from the notorious and very expensive-to-repair “Injector Rattle“, and many other problems that stem from our modern diesel fuel. Perfect for all types of diesel engines. Find out more…
One of the main causes of decreasing fuel economy/gas mileage and sluggish performance from modern engines is fouled fuel injectors – both gasoline and diesel. By adding Cleanpower Fuel Treatment and Fuel Injector Cleaner to the fuel tank, either gasoline or diesel, with its extremely effective detergents and dispersants (not corrosive and abrasive solvents), it will effectively clean fouled fuel injectors, quickly restoring performance and fuel mileage that has deteriorated over time. Find out more…
Common problems with modern Ultra-low Sulfur Diesel systems are:
- Blocked injectors caused by contaminants – incorrect spray patterns cause a host of
problems including loss of engine power, poor performance, excessive diesel exhaust smoke, excessive fuel consumption. - Seized or sticking injectors due to lack of lubrication – caused by Ultra Low Sulfur Diesel fuel, produces over-fueling which creates detonation inside the combustion chamber, which, if not corrected, will result in melted pistons.
- Noisy, rattling injectors – low inherent lubricity of Ultra Low Sulfur diesel causes diesel injectors to often operate well below specifications, and can often cause extreme engine damage.
Find out more…
Contaminants/deposits in the fuel injection system and combustion chamber directly impact performance and economy. The result, at the least – poor fuel economy/gas mileage and less than ideal performance. At worst, engine failure – a reason to ensure fuel injectors are free of deposits. Adding Cleanpower Fuel Treatment and Fuel Injector Cleaner to the fuel tank, either gasoline or diesel, with its extremely effective and concentrated detergents and dispersants (not corrosive and abrasive solvents) will remove harmful deposits, quickly restoring performance and efficiency that has gradually deteriorated over time. Find out more here…
The benefits of using FTC Decarbonizer include prolonged engine life, extended turbocharger life, reduced emissions, reduced exhaust smoke, reduced oil use and engine blow-by, increased fuel mileage, just to name a few. Find out more…
The engine’s entire fuel system, particularly the fuel injectors and fuel pump, can be totally cleaned of any contaminants that can harm the entire fuel system components just by adding super-concentrated Cleanpower Fuel Treatment. Cleanpower is one of the least expensive to use, yet most effective solutions to thoroughly restoring all fuel system components to ‘like new’ condition and performance. Find out more…
ULS Diesel Enhancer is the real life FIX for many High Pressure Injection, Ultra Low Sulfur Diesel problems, including sticking, noisy injectors, exhaust smoke, poor or erratic performance, etc. ULS Diesel Enhancer safely and very effectively cleans fuel pump and injector deposits, and disperses contaminants as they form, as well as providing essential injector lubrication. Find out more…
High Pressure Injection diesel engines (CRDi, HPCR, and HEUI) have been developed and introduced to meet modern emission standards. However, with the addition of this new technology, and the introduction and constant modification of Ultra-low Sulfur Diesel, there are a flood of horror stories about modern diesel problems! ULS Diesel Enhancer is a highly concentrated diesel fuel treatment, especially designed to overcome most Ultra-low Sulfur Diesel problems, especially the low lubricity problem inherent in modern diesel fuel. It has proven to clean the entire diesel fuel system, restore power and economy, reduce exhaust smoke, boost diesel fuel lubrication properties, and provide exceptional anti-rust protection to pumps and injectors – a low-cost solution to Ultra-low Sulfur Diesel problems – the total Ultra-low Sulfur Diesel fuel system treatment! Find out more…
Flushing Oil Concentrate
is an extremely safe detergent based oil system cleaner, remarkably effective at dissolving and removing the most stubborn carbon and sludge that can be responsible for causing excessive oil consumption, smoke, engine blow-by, power loss and other problems. You want your engine internal components really clean? Nothing else comes close. Seriously! Find out more…
Both Cleanpower and ULS Diesel Enhancer are extremely safe and effective, heavy duty fuel system cleaners and conditioners, especially formulated to thoroughly clean the entire fuel system – fuel pumps, lines and injectors. Super-concentrated Cleanpower is suitable for all gasoline and diesel applications, removing all fouling deposits, even stubborn ones that most “off the shelf” products won’t touch. ULS Diesel Enhancer is developed from Cleanpower, and enhanced especially for use with Ultra Low Sulfur diesel by fortifying it with especially strong lubricity and anti-corrosion chemicals and detergents, solving many of the problems with the modern breed of High Pressure Injection diesel engines (CRDi, HPCR, and HEUI). It can be used in all diesels, but is not suitable for gasoline engines. Find out more…
Flushing Oil Concentrate is not just another harmful solvent based, off-the-shelf engine flush that you simply pour into the engine and forget about. Decades of research and development have produced this remarkably effective, totally safe to use product. Flushing Oil Concentrate is a highly concentrated, specialized detergent-based treatment, designed specifically to do a tough job, a job that other available treatments just cannot do. Nothing else comes close. Seriously! Find out more…
Decades of research and development have enabled Flushing Oil Concentrate to be totally effective at restoring pristine cleanliness to all internal engine components. It is possibly the most effective and safe treatment in removing harmful and performance draining sludge, hard carbon, soot and other contaminants and deposits from oil-wetted engine components. Extend the life of your engine – use Flushing Oil Concentrate at every oil change. Find out more…
Yes! FTC Decarbonizer really works! It has been used for decades by every kind of vehicle and machinery operator, including large mining and trucking operations, as well small everyday car and truck owners, and has shown that it reduces or eliminates many costly problems associated with engine operation, i.e. engine blow-by, exhaust smoke, Diesel Particulate Filter problems, power loss, heavy exhaust emissions etc. Find out more…
Flushing Oil Concentrate
is the most effective and safe treatment in removing harmful and performance draining sludge, hard carbon, soot and other contaminants and deposits from oil-wetted engine components. It contains a highly concentrated selection of specific detergents and dispersants, (not abrasive and corrosive solvents) which enable lubricating oils to pick up and suspend deposits as a fine dispersion. In such a way, sludge, gum, dirt and wear metals are removed with the oil change. By following the recommended treatment instructions, the very best possible results from Flushing Oil Concentrate can be achieved. Treatment instructions are included with the product, as well as online. Find out more…
Flushing Oil Concentrate is remarkably effective in dissolving and suspending contaminants in oil. When used as recommended, when the existing engine oil is brought to operating temperature and then drained, many existing contaminants are carried out of the engine with the old oil. By then adding new/clean oil to the engine, along with Flushing Oil Concentrate, it significantly increases the capacity of the oil (the carrier for the contaminants) to suspend and carry more of the sludge and carbon deposits out of the engine. Some engines have a very large accumulation of sludge to remove, consequently, the cleaner the ‘carrier’ oil is, the better the overall result. Find out more…
AW10 Antiwear
is an extremely powerful anti-friction, anti-wear treatment for engine, gearbox and transmission, differential and hydraulic oils. It also provides excellent anti-rust protection. It may not be suitable for ‘low pressure’ wet clutch and some small wet brake applications, i.e. motorcycle wet clutches, ATV wet brake systems etc. Extend the life of your vehicle or machine! Find out more…
No, it doesn’t matter when you use the Flushing Oil Concentrate. If you’re close to the time of a scheduled oil change, you can wait until that time comes around. But if that is still a long way off, it is recommended to do the flush as soon as is convenient, just to get the full effect of what you are striving to achieve, as soon as possible. FTC Decarbonizer and Flushing Oil Concentrate do different jobs, but they work extremely well together in overcoming a host of problems; blow-by and excessive oil burning being major ones. If you have both products available, it is recommended to start using the FTC Decarbonizer in the fuel as soon as possible and carry out the engine oil flush as soon as is convenient.
The lower ‘oil control’ ring on the piston gets pretty sludged and blocked over time, and that contributes to blowby/oil burning/carbon by-products etc. Flushing Oil Concentrate will de-sludge the oil control ring groove as well as the ‘drain-back’ slots in the piston ring groove. This action restores correct oil control on the cylinder walls.
Some engines that are really badly sludged up sometimes need a second, follow-up flush in about 600 – 1000 miles (10 – 12 hours) from the first initial, concentrated flush. Instructions about this are on the Flushing Oil Concentrate Instruction Sheet. A good way to tell if a second, follow-up flush is needed is to check the color of the engine oil at about 500-ish miles since the initial flush. If the oil is once again very dark or even black at that time, the follow-up flush is suggested. If the oil isn’t super dirty and gritty looking, you can safely assume that the system is good and clean from the initial flush and you can just plan to use the Flushing Oil Concentrate with the next scheduled routine oil change. Information about that is also on the Instruction Sheet that is included with the product.
Some other engine flushes use solvents to clean, and these could have the potential to adversely affect specially coated bearings and pistons, seals, O-rings and other elastomers inside an engine, as well as the potential corrosive and abrasive effects of typical solvents. Flushing Oil Concentrate is much safer. It uses a special detergent type product, as all engine oils do. However, its special formulation targets heavier deposit molecules such as hard baked on carbon and heavy persistent sludge, as well as the more easily removed deposits. When used as recommended, Flushing Oil Concentrate cannot harm your engine. Nothing comes close. Seriously! Find out more…
Yes, AW10 Antiwear is totally suitable and recommended to use in automatic transmissions. It strengthens the transmission fluid to greatly reduce component wear, as well as reducing operational heat generation. An extremely effective and low cost way to boost your automatic transmission’s performance and reliability. Find out more…
Oil wears out, or, more technically, ‘breaks down‘ when the internal heat of an engine, transmission or driveline etc, causes a chemical reaction in the lubricating oil, which causes the oil’s viscosity to change. Simply, when an engine, transmission or hydraulic system heats up beyond a certain temperature threshold, the lubricating oil will begin to wear out, break down or degrade. This break down has many serious damaging effects. Find out more…
Yes, it does. FTC Decarbonizer is a unique combustion catalyst. During the fuel combustion process, it oxidizes hard carbon from combustion and exhaust spaces, including turbos and DPF’s, and the hard-carbon buildup on cylinder walls that is refered to as “cylinder glaze”. The oxidization process really will deglaze cylinders as the engine operates. Find out more here…
Lubricating oil has 2 often-overlooked, yet very important functional requirements – It has to COOL and it has to CLEAN the engine components it is in contact with. Full, unrestricted flow of clean oil to all engine components is essential to provide proper cooling and lubricating ability to the engine. A highly effective way to keep an engine cool is to remove all sludge and oil contaminants by regularly using Flushing Oil Concentrate at time of oil change. Nothing else matches it. Seriously! Find out more…
Transmission heat is generated from 2 sources. Firstly, frictional heat when the oil film is ruptured allowing metal-to-metal contact. Secondly, heat is generated through fluid friction caused by the constant churning of the oil during operation. AW10 Antiwear is formulated to deliver tremendous increases in lubricant load carrying ability, wear reduction and friction and heat reduction. Semi trucks see reductions in gearbox and diff temperatures of 15 to 25˚F (9.5°C to 32°C). Find out more here…
Engine oil cleanliness is vital to the life of an engine, because when sludge builds up inside an engine, it restricts the flow of vital oil through the oil filter and oil galleries and subsequently to all lubricated engine components. Ultimately, this restricted and contaminated oil supply can lead to complete engine failure. Use remarkably effective and totally safe Flushing Oil Concentrate as recommended to completely remove the most persistent engine sludge and all hard baked-on carbon to restore pristine cleanliness to all oil-wetted parts of the engine. It’s more than just a rinse; it’s a full-on, heavy-duty, safe-to-use cleaner. Nothing else matches it. Seriously! Find out more here…
Increase the load carrying capacity of your oil, whether it be engine, transmission, final drive or hydraulic oil. AW10 Antiwear multiplies an oil’s load carrying ability without increasing its viscosity (or drag). This Oil Enhancer carries a much higher load than the oil itself is capable of, making every lubricated part more protected, efficient and wear resistant. And importantly, AW10 Antiwear does not alter the viscosity of the oil. Find out more…
Engine oil cleanliness is vital to the life of an engine, as any sludge can restrict the flow of oil to critical engine components, causing component failure and ultimately, an expensive engine overhaul. By using remarkably effective Flushing Oil Concentrate as recommended, it will effectively remove the most persistent engine sludge and all hard baked on carbon to restore pristine cleanliness to all oil-wetted parts of the engine. It’s more than just a rinse; it’s a full-on, heavy-duty, safe-to-use cleaner. Find out more…
The engine oil light comes on when your engine suffers a drop in pressure at the oil pressure sensor. Apart from a faulty oil pressure sensor, the problem can be caused by:
- insufficient oil pressure leaving the oil pump. Without enough oil pressure, the engine can’t lubricate itself sufficiently, and if the engine is continued to be operated, it will totally seize and be destroyed.
- oil sludge build-up within the oil distribution circuits of the engine, causing a restriction of oil supply to vital engine components.
Find out more…
Manufacturers of many modern passenger car and light truck engines recommend extended oil drain intervals – 12,000 to 15,000 miles is not uncommon. It’s almost impossible for these engines to operate for such extended intervals without forming engine-destroying sludge in the lubricating system. The solution to this problem is to use Flushing Oil Concentrate at every oil change – a very small cost compared to the costs of engine damage due to inadequate lubrication caused by sludge and other contaminants in the engine oil. Find out more…
FTC Decarbonizer
is a result of research scientists working on organo-metallic materials to act as an octane booster in gasoline, decades ago. Their work concentrated on a group of chemicals classified as metal based combustion catalysts. One chemical in particular proved extremely interesting to them – they discovered that the addition of trace amounts of this chemical (56 parts per billion) to automotive fuel improved combustion efficiency by measurable amounts.This was the beginning of FTC Decarbonizer… Find out more here…
Engine-destroying sludge accumulates in the oil over time, often a result of carbon contaminants (combustion waste) entering the oil, as well as extended oil drain intervals coupled with poor maintenance schedules. A very safe, highly effective, low cost way of removing engine-destroying sludge is to use Flushing Oil Concentrate at every oil change. Flushing Oil Concentrate dissolves and suspends all sludge deposits (even the hard, baked-on type) within the engine. Find out more…
Flushing Oil Concentrate reduces oil use markedly by providing a clean seal for piston rings against ring grooves and the cylinder walls, as well as unblocking the drain-back segments of oil-control rings. Very few exceptions occur, unless severe wear or damage exists. We recommend care when flushing gasoline engines from the 1980’s and earlier. They are more likely to burn oil if they have had a poor maintenance history. Find out more…
FTC Decarbonizer
has been scientifically tested and analyzed over many years. Research and test facilities include: University of California, Los Angeles(UCLA), CA 1971, Brigham Young University, UT, University of Perugia, ITALY, Southwest Research Institute (SWRI)TX, and many others. Find out more…
FTC Decarbonizer modifies the chemistry of the fuel combustion process, to accelerate the fuel burn (explosion) and oxidize existing combustion chamber and exhaust system carbon. This action is harmless to engine components and is a progressive action, working first on the easier softer deposits, and eventually on stubborn hard carbon that would normally have to be chiselled off at overhaul. Find out more…
Excessive engine oil use is often caused by glazed cylinders, stuck compression rings, and blocked oil-control rings. A build-up of carbon deposits create these problems and allow engine oil to get into the combustion chamber where it is burned, which only produces more harmful carbon deposits. The solution is to safely and effectively eliminate these baked-on deposits with FTC Decarbonizer and Flushing Oil Concentrate. Find out more…
In the large majority of cases, cylinder glaze is carbon build-up in the cylinder cross-hatch grooves. This hard carbon, a result of poor or inefficient combustion, builds up over time in the cross hatch micro grooves of the cylinder, and becomes mirror smooth due to the piston ring’s polishing effect. In the past, the only way to deglaze cylinders meant a complete engine tear-down. However, a better alternative is to use FTC Decarbonizer in the fuel. It is a safe, very low cost, and completely effective method of oxidizing (burning off) carbon deposits, including cylinder glaze, piston ring groove deposits, etc. Over the years, thousands of engines have been spared from an engine rebuild by using FTC Decarbonizer. When many engines are rebuilt to overcome problems such as excessive oil use, low compression, and blow-by etc., it is very often found that they are not excessively worn, but are just heavily carboned-up, particularly on the cylinder bores and in the ring grooves. These are the types of engines that can be effectively recovered with FTC Decarbonizer – preventing a rebuild, saving valuable time and hard-earned money. Find out more here…
Stuck piston rings are caused by carbon deposits in the ring grooves. Hard carbon deposits, a result of deficient combustion efficiency, accumulate in the ring grooves and in effect cement the rings into the grooves. This problem almost entirely prevents the rings from sealing adequately against the cylinder walls and often causes low compression, loss of engine power, excessive oil use, exhaust smoke, and blow-by. In the past, the only way to free up stuck piston rings was to overhaul the engine. However, a proven alternative is to use FTC Decarbonizer. It is a totally safe, very low cost, and a completely effective method of oxidizing (burning off) carbon deposits in piston ring grooves as well as cylinder glaze, injector carbon, etc. Thousands of engines have avoided expensive mechanical overhaul by using this unique fuel catalyst. Find out more here…
Forced DPF regenerations often cause some of the excess fuel required for regenerations to get past the piston rings into the engine oil. This causes excessive fuel dilution of the oil, which is bad for any modern diesel engine. Often, forced ‘regens’ also promote diesel soot backing up into the engine, causing damage to the turbocharger and fuel injectors. Here’s a very good solution…
FTC Decarbonizer causes all carbon in combustion and exhaust spaces, including any soot trapped in the DPF, to combust and be eliminated at temperatures as low as 575⁰F to 750⁰F (300°C to 400°C) – a temperature readily reached by diesel engines. Find out more…
Yes, FTC Decarbonizer is a genuine biocide and a lot safer to use compared to some other biocides! It will kill the diesel bug – diesel growths (bacteria, fungi, algae) quickly, and most importantly with little or no fuel filter clogging issues! Find out more…
Maxodyne Stop Smoke Gasoline Pack
Maxodyne Stop Smoke Diesel Pack
Yes! It’s a great idea to use FTC Decarbonizer and Cleanpower (or ULS Diesel Enhancer) together! They do different jobs, yet they work remarkably well together in overcoming many potentially costly engine problems – excessive exhaust smoke, engine blow-by, low performance/fuel mileage, etc. ULS Diesel Enhancer is a diesel-only formulation; not to be used in gasoline powered engines. It is not necessary to use ULS Diesel Enhancer and Cleanpower together. Find out more…
Maxodyne Ultimate Diesel Pack
Maxodyne FTC Decarbonizer
Diesel engines are often harder to start in winter. This hard start condition is very often due to engine deposit build-up. Over time, internal engine deposits continually build up and very often have an adverse effect on many areas of engine performance, especially cold starting. Here’s a solution…
Maxodyne Ultimate Diesel Pack
Maxodyne FTC Decarbonizer
The hard starting problem with diesel engines can often be fixed by using FTC Decarbonizer in the fuel. It acts as a highly effective combustion catalyst to ignite fuel much easier during cold starts. It also safely and effectively oxidizes (burns off) hard carbon deposits from combustion and exhaust spaces, including cylinder glaze and piston ring groove carbon – increasing cylinder compression. Find out more here…
Maxodyne Stop Smoke Diesel Pack
Maxodyne Stop Smoke Gasoline Pack
The color of engine exhaust smoke and when it occurs can tell you a lot about your engine’s condition. Basically, there are three types of exhaust smoke – black exhaust smoke, blue exhaust smoke, and white exhaust smoke. Though each type of exhaust smoke has a story to tell, visible exhaust smoke is an indication that things are not right with your engine, and could be a sign of expensive repairs ahead. There’s a cost effective solution to exhaust smoke problems! Find out more…
Maxodyne Stop Smoke Gasoline Pack
Maxodyne Stop Smoke Diesel Pack
White smoke is caused by unburnt diesel fuel leaving the combustion chamber and entering the exhaust system. When white smoke occurs at cold start, and then disappears as the engine warms up, the most common causes are fouling deposits around piston rings and/or cylinder glazing. That’s not a good sign! Usually the smoke problems your engine is exhibiting can be solved by using FTC Decarbonizer, Flushing Oil Concentrate, Cleanpower (or ULS Diesel Enhancer). These products are proven to be highly effective at fixing most exhaust smoke problems, though especially the particular problem of white smoke on cold starts. Find out more…
Maxodyne Stop Smoke Gasoline Pack
Maxodyne Stop Smoke Diesel Pack
Exhaust smoke is an engine symptom to be concerned about. It indicates that an engine is not running right, and its service life is likely to be shortened considerably, unless something is done to address the problem. The important thing to do is to see it as an opportunity to take measures that will save you money in both the long term and also the short term. The good news is that before spending a lot of money having fuel injectors replaced, fuel pumps overhauled, turbochargers replaced, or an engine rebuild, often there is a cost effective way to stop the exhaust smoke problems your engine is having. Usually the problem can be solved by using FTC Decarbonizer, Flushing Oil Concentrate, and Cleanpower (or ULS Diesel Enhancer). Find out more…
The fuel additive products, Cleanpower and ULS Diesel Enhancer both improve fuel stored for a long time as they reduce fuel oxidization and degradation, as well as resultant fuel system fouling. In addition, FTC Decarbonizer can also be added to assist in burning aged gasoline and diesel cleanly, along with protecting against diesel bug! Find out more…
Stop Smoke Gasoline Pack
Stop Smoke Diesel Pack
Combustion efficiency in all engines can be increased to ‘as-new’ levels simply by restoring the combustion chamber and associated components to original condition. This is done simply by using FTC Decarbonizer as recommended, and ensuring fuel delivery systems are also kept in ‘as new’ condition. Here’s a solution…
No. Our fuel products/additives all mix easily and will not settle out from the fuel, even over prolonged periods of time. In addition, FTC Decarbonizer and Marine Diesel Stabilizer control microbial fuel growths in fuel, subsequently prolonging the life of the fuel to which it is added. As a fuel catalyst, FTC Decarbonizer enhances the combustion process of fuel, both gasoline, and more particularly, diesel, which helps “old” fuel ignite and combust faster and more efficiently. Find out more…
Yes! These products are suitable and recommended for new vehicles. The sooner they are used, the sooner they start protecting your vehicles, and the longer they’ll last and stay at peak performance and efficiency.
Generally, start using AW10 Antiwear after the first oil change in engines to allow some initial bed-in to occur. For all other components, AW10 Antiwear can be used from new. Also, use FTC Decarbonizer, Cleanpower, ULS Diesel Enhancer and Marine Diesel Stabilizer from new to maintain your vehicle or machine in the best condition possible, prolonging its life and reducing costly prevenatable repairs.
These products are highly concentrated liquids; exceeding the recommended dosage is unnecessary. Here is general information about each product…
FTC Decarbonizer: No concerns with overdosing.
Flushing Oil Concentrate: No concerns with overdosing.
ULS Diesel Enhancer: If severe overdosing occurs, there is minimal risk of any engine fault. There is a slight possibility of a little white smoke from the exhaust until the ratio returns to the recommended dose. In extreme cases, refuel the tank more frequently to help return to correct dosage recommended.
Cleanpower: No concerns with overdosing.
AW10 Antiwear: If extreme overdosing occurs, replace oil and add AW10 Antiwear to recommended levels.
Marine Diesel Stabilizer: There is very minimal risk of any engine fault even if extreme overdosing occurs. A little white smoke may be evident from the exhaust until the ratio is returned to the recommended rate. In extreme cases, refuel the tank more frequently to help return to correct dosage recommended.
Again, these products are highly concentrated liquids; exceeding recommended dosage is unnecessary.
Choose the most appropriate FTC Decarbonizer size for your particular need. Various size options are available –
FTC Decarbonizer is added directly to the fuel tank (diesel or gasoline) at time of fill up.
It is recommended to use a ‘double dose’ for the first few tankfuls of fuel so that it can do a thorough job of oxidizing tough carbon deposits in combustion areas as quickly and effectively as possible – this includes piston rings, ring grooves, exhaust valves, turbochargers, piston crowns, and deglazing cylinder bores. The amount or the severity of the hard carbon deposits will determine how quickly the oxidizing process takes – if there is not much carbon build up, the results will be achieved sooner than if there is a large amount of carbon build up to be oxidized. Every engine is different in this respect. Thereafter, the single dose rate can be used to continue to clean further deposits, and to keep the complete combustion area clean and working efficiently, particularly significantly reducing the production of engine-destroying soot. Continued use over time ensures maximum fuel efficiency and power, smooth engine operation, and less harmful emissions/exhaust smoke – all resulting in longer engine life and lower ongoing maintenance costs.
Large diesel engines: e.g. over 9.0 liter/550 cubic inch engine displacement
Add 16 fl oz per 100 gallons for the first few tankfuls of fuel (500 mL per 400 liters of fuel).
Thereafter, add 8 fl oz per 100 gallons of fuel (250 mL per 400 liters of fuel).
Small diesel & gasoline engines:
Add 1.6 fl oz per 10 gallons for the first few tankfuls of fuel (50ml per 40 liters of fuel).
Thereafter, add 0.8 fl oz per 10 gallons of fuel (25 mL per 40 liters of fuel).
As a rule of thumb, and depending on the engine’s fuel consumption rate, the following is usually helpful in determining which size is most suitable for your application –
- 16 fl oz of FTC Decarbonizer is usually enough to treat all small engines up to approximately 3.0 liter engine capacity (185 Cubic Inch) – passenger car, SUV, small tractor, or similar machines/boats etc.
- 32 fl oz of FTC Decarbonizer is usually enough to treat all engines up to approximately 6.0 liter engine capacity (370 Cubic Inch) – small to mid-size trucks, RV’s, large gasoline engines, tractors, or similar machines/boats etc.
- 64 fl oz of FTC Decarbonizer is usually enough to treat all engines up to approximately 9.0 liter engine capacity (550 Cubic Inch) – medium trucks, RV’s, tractors, or similar machines/boats etc.
- 1 gallon & 2 gallons of FTC Decarbonizer is usually enough to treat all engines over 9.0 liter engine capacity (over 550 Cubic Inch) – large trucks, tractors, other machine/boats etc.
(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Choose the most appropriate Flushing Oil Concentrate size for your particular need. Various size options are available –
Flushing Oil Concentrate is added directly to the oil immediately prior to the oil change. It is not recommended to be added to the oil and ran for extended periods of time. For the very best results, we recommend the following treatment rates –
Initial/Dirty Engine concentrated flush: add Flushing Oil Concentrate to the engine oil at 0.5 fl oz per quart of clean engine oil (12.5 mL per liter of engine oil).
- 8 fl oz of Flushing Oil Concentrate treats a maximum of 16 quarts (4 gallons/19 liters) of oil
- 16 fl oz of Flushing Oil Concentrate treats a maximum of 32 quarts (8 gallons/38 liters) of oil
- 32 fl oz of Flushing Oil Concentrate treats a maximum of 64 quarts (16 gallons/76 liters) of oil
- 64 fl oz of Flushing Oil Concentrate treats a maximum of 128 quarts (32 gallons/151 liters) of oil
- 1 Gallon of Flushing Oil Concentrate treats a maximum of 256 quarts (64 gallons/302 liters) of oil
Basically, the initial, hard-working, concentrated flush breaks down and suspends heavy, baked-on sludge – the sludge that causes piston oil-rings to block up and stick in the grooves, oil pumps to reduce pressure, and oil galleries to be restricted. It also dissolves the clumps of hardened sludge on the oil pan and other crankcase components. It assists in the breakdown of hard carbon on the piston skirts, lower compression ring and cylinder walls.
Continuing maintenance oil change flush (i.e. subsequent maintenance oil changes after the initial concentrated flush): add Flushing Oil Concentrate to the engine oil at 1/10th fl oz per quart of engine oil (2.5 mL per liter of engine oil).
Instructions:
INITIAL TREATMENT/DIRTY ENGINES
Bring engine to FULL operating temperature. Drain old oil and refill with new, clean oil (this can be inexpensive oil for this purpose). It is a good idea to replace the oil filter/s at this time as possible heavy contamination of the existing filter may occur during the flushing process. Operate the engine to warm up the oil again, then add Flushing Oil Concentrate to engine oil at 0.5 fl oz per quart (12.5 mL per liter) of engine oil. Run the engine at a fast idle, stationary, for 45 minutes. For most small and medium size engines, this means 1500 – 2000 RPM. For larger size engines (e.g. over 9.0 liter/550 cubic inch engine displacement), run at about 1200 RPM. After 45 minutes, stop the engine and drain the engine oil while the engine is still hot. Replace oil filter. Refill with quality engine oil.
Example:
- 5 quart/liter oil capacity = 2.5 fl oz (60 mL) Flushing Oil Concentrate
- 5 gallon (20 liter) oil capacity = 10 fl oz (250 mL) Flushing Oil Concentrate
- 10 gallon (40 liter) oil capacity = 20 fl oz (500 mL) Flushing Oil Concentrate
CONTINUING MAINTENANCE
Bring engine to FULL operating temperature. Add Flushing Oil Concentrate to existing engine oil at 0.1 fl oz per quart (2.5 mL per liter) of engine oil. Drive/operate normally for 30 – 60 minutes, then continue with normal oil change while the engine is still hot.
Example:
- 5 quart/liter oil capacity = 0.5 fl oz (12.5 mL) Flushing Oil Concentrate
- 5 gallon (20 liter) oil capacity = 2 fl oz (50 mL) Flushing Oil Concentrate
- 10 gallon (40 liter) oil capacity = 4 fl oz (100 mL) Flushing Oil Concentrate
Occasionally, on an engine with years or decades of sludge build up, a second follow up concentrated flush may be required soon after the initial flush (600 – 1200 miles, 1000 – 2000km). It is suggested to add Flushing Oil Concentrate to clean oil (as per instructions for the “Initial Treatment/Dirty Engines”), at a rate of 0.25 (1/4) fl oz Flushing Oil Concentrate per quart of engine oil (6.25 mL per liter of engine oil). Operate the engine normally for between 4 – 6 hours, then drain the oil while hot, replace oil filters, and fill with quality oil.
Detailed information can be found HERE.
(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Choose the most appropriate ULS Diesel Enhancer size for your particular need. Various size options are available –
ULS Diesel Enhancer is added directly to the fuel tank (diesel only) at time of fill up.
Treatment rate: 1:8000. Add 0.16 fl oz per 10 gallons of fuel (5 mL per 40 liters of fuel)
Example:
- 10 gallons of fuel – add 0.16 fl oz (40 liters of fuel – add 5 mL)
- 40 gallons of fuel – add 0.6 fl oz (100 liters of fuel – add 12.5 mL)
- 80 gallons of fuel – add 1.2 fl oz (300 liters of fuel – add 37.5 mL)
- 150 gallons of fuel – add 2.4 fl oz (500 liters of fuel – add 62.5 mL)
As a rule of thumb, and depending on the fuel consumption rate the engine achieves, the following is usually helpful in determining which size is most suitable for your application –
- 8 fl oz – treats up to 500 gallons (1900 liters) of diesel. This is usually enough to treat diesel-powered cars, small to medium pickup trucks, small agricultural tractors & machinery, small boats, small generators, etc.
- 16 fl oz – treats up to 1000 gallons (3800 liters) of diesel. This is usually enough to treat diesel-powered mid-size pickup trucks, box trucks, small RVs, medium agricultural tractors & machinery, medium boats, generators, etc.
- 32 fl oz – treats up to 2000 gallons (7600 liters) of diesel. This is usually enough to treat diesel-powered large trucks, RVs, large agricultural tractors & machinery, large excavators, dozers, large boats, etc.
- 64 fl oz – treats up to 4000 gallons (15,000 liters) of diesel. This is usually enough to treat 2 or 3 diesel-powered trucks, or a combination of trucks and other machines, boats, etc.
- 1 Gallon – this is usually enough to treat a number of diesel-powered large trucks & machinery, combinations of various machinery and/or boats, Fleet & workshops, etc.
(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Choose the most appropriate Cleanpower size for your particular need. Various size options are available –
Cleanpower Super-concentrated Fuel Treatment is added directly to the fuel tank (diesel or gasoline) at time of fill up.
It is recommended to use a ‘double dose’ (1:4000) for the first few tankfuls of fuel, so that it can do a thorough job of removing tough deposits on injector tips quickly. After that, the single dose rate (1:8000) can be used to continue to clean further deposits, and to keep the complete fuel system clean, and the injectors delivering fuel as designed by the vehicle’s manufacturer. Continued use will ensure maximum fuel efficiency & power, smooth engine operation, and less harmful emissions/exhaust smoke – all resulting in longer engine life and lower ongoing maintenance costs.
Initial treatment rate: 1:4000
Large diesel engines: e.g. over 9.0 liter/550 cubic inch engine displacement
Add 3.2 fl oz per 100 gallons of fuel for the first few tankfuls of fuel (100 mL per 400 liters of fuel)
Thereafter (rate 1:8000): add 1.6 fl oz per 100 gallons of fuel (50 mL per 400 liters of fuel)
Small diesel & gasoline engines:
Add 0.3 fl oz per 10 gallons for the first few tankfuls of fuel (10 mL per 40 liters of fuel)
Thereafter (rate 1:8000): add 0.15 fl oz per 10 gallons of fuel (5 mL per 40 liters of fuel)
As a rule of thumb, and depending on the fuel consumption rate the engine achieves, the following is usually helpful in determining which size is most suitable for your application –
- 8 fl oz – can treat up to 500 gallons (1900 liters) of fuel. This is usually enough to treat cars, small to medium pickup trucks, small agricultural tractors & machinery, small boats, small generators, etc.
- 16 fl oz – can treat up to 1000 gallons (3800 liters) of fuel. This is usually enough to treat mid-size pickup trucks, box trucks, small RVs, medium agricultural tractors & machinery, medium boats, generators, etc.
- 32 fl oz – can treat up to 2000 gallons (7600 liters) of fuel. This is usually enough to treat large trucks, RVs, large agricultural tractors & machinery, large excavators, dozers, large boats, etc.
- 64 fl oz – can treat up to 4000 gallons (15,000 liters) of fuel. This is usually enough to treat 2 or 3 large trucks, or a combination of trucks and other machines, boats, etc.
- 1 Gallon – this is usually enough to treat a number of large trucks & machinery, combinations of various machinery and/or boats, Fleet & workshops, etc
(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Choose the most appropriate AW10 Antiwear size for your particular need. Various size options are available –
AW10 Antiwear is added directly to the lubricating oil – engine, transmission (automatic or manual), differential, final drive and hydraulic oils.
Treatment rate:
- Engines: add at 2% of lubricating oil capacity
- Manual transmissions, differential, final drives: add at 5% of lubricating oil capacity
- Automatic transmissions & hydraulics: add at 1% of lubricating oil capacity
As a rule of thumb, and depending on the vehicle’s oil capacities, the following is usually helpful in determining which size is most suitable for your application –
- 8 fl oz & 16 fl oz – Suitable quantities for cars & small to medium SUV’s, small trucks, etc
- 32 fl oz & 64 fl oz – Suitable quantities for medium trucks, RV’s, 4 Wheel-drives, etc
- 1 Gallon – Suitable quantity for large trucks & machinery, Fleet & workshops etc
Below is a chart that may be helpful to determine how much you need depending on your vehicle’s oil capacity.
(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Choose the most appropriate size Engine Blow-by Pack for your particular need. 5 size choices are available – Mini, Mini Plus, Small, Medium or Large Pack
The Engine Blow-by Pack is our most popular Value Pack because of the positive results it achieves in effectively reducing engine blow-by and increasing engine efficiency and performance. The pack contains 2 very effective products –
- FTC Decarbonizer: a unique fuel catalyst – it enhances the combustion process of fuel (both gasoline and diesel), causing the fuel to burn much more completely (therefore much less soot formed), as well as oxidizing (burning off) all existing hard carbon within the combustion area, including piston crowns and ring grooves, cylinder walls (deglazes the cylinders), turbochargers etc.
- Flushing Oil Concentrate: has a remarkable effect on un-sticking piston rings, especially the oil-control ring. By removing hard baked on sludge and carbon from the oil-control ring, it can once again seal correctly against the cylinder wall, reducing engine blow-by and oil use.
The Engine Blow-by Pack is available in 5 different size combinations:
Mini Pack contains –
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of Flushing Oil Concentrate
This pack is usually suitable for small to mid-size vehicles and machinery; cars and light trucks, tractors, small boats, stationary generators, etc. with engines up to approximately 6.0 liter engine capacity (370 cubic inch), and having up to 16 quarts (4 gallons/19 liters) oil capacity and achieving approximately 15MPG (15L/100km) or better.
Mini Plus Pack contains –
- 64 fl oz of FTC Decarbonizer
- 16 fl oz of Flushing Oil Concentrate
This pack is usually suitable for mid-size vehicles and machinery; light trucks, RVs, medium tractors and machinery, boats, etc. with engines up to approximately 9.0 liter engine capacity (550 cubic inch), and having up to 32 quarts (8 gallons/38 liters) oil capacity and achieving approximately 15MPG (15L/100km).
Small Pack contains –
- 1 gallon of FTC Decarbonizer
- 32 fl oz of Flushing Oil Concentrate
This pack is usually suitable for larger vehicles and machinery; medium to large trucks, large machinery, boats, etc. with engines over 9.0 liter engine capacity (over 550 cubic inch), and having up to 64 quarts (16 gallons/76 liters) oil capacity and achieving less than approximately 15MPG (15L/100km). This Small Pack is most popular with Truckers and Marine vessel operators.
Medium Pack contains –
- 2 gallons of FTC Decarbonizer
- 32 fl oz of Flushing Oil Concentrate
This pack is most suitable for trucks etc. that cover a lot of miles relatively quickly, e.g. long distance OTR Truckers. The 2 gallons of FTC Decarbonizer keeps these trucks on the road for a long period of time without needing to reorder as often, allowing for the full benefit of the ongoing de-carbonizing effect, ultimately removing all engine-destroying hard carbon from the combustion chamber, and promoting more efficient long-term engine performance.
Large Pack contains –
- 4 gallons of FTC Decarbonizer
- 64 fl oz of Flushing Oil Concentrate
This pack is usually suitable for small fleet operators with up to 3 or 4 trucks or other equipment, or a combination of different types of machines, e.g. truck, excavator, dozer, crane, boat, etc.
This Pack is suitable for both gasoline and diesel engines.
(32 fl oz= 946 mL, 1 liter = 33.8 fl oz)
For marine diesel use only. Add directly to the diesel fuel tank.
Click here for Printable Treatment Rate Chart (U.S. Customary & Metric)
Standard Treatment Rate : 1:1200
16 fl oz treats 150 gallons (568 liters) of diesel
32 fl oz treats 300 gallons (1135 liters) of diesel
64 fl oz treats 600 gallons (2270 liters) of diesel
1 gallon treats 1200 gallons (4540 liters) of diesel
Boost Treatment Rate: 1:600
For badly contaminated tanks and “Long Term” storage to prevent diesel oxidation.
16 fl oz treats 75 gallons (284 liters) of diesel
32 fl oz treats 150 gallons (568 liters) of diesel
64 fl oz treats 300 gallons (1135 liters) of diesel
1 gallon treats 600 gallons (2270 liters) of diesel
32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Not sure which pack size to get? Choose the most appropriate Stop Smoke Gasoline Pack size for your particular need – Mini, Mini Plus, Small, Medium or Large Pack
The Stop Smoke Gasoline Pack contains 3 very effective products –
- Cleanpower – the ultimate in cleaning complete fuel systems. It removes fouling deposits in fuel injectors, even stubborn ones, that most “off the shelf” products won’t touch. It eliminates engine rough idle and provides smoother operation throughout the full rev-range. It contains an upper cylinder lubricant to keep cylinders and pistons cooler, all the while reducing wear.
- FTC Decarbonizer – acts as a truly unique combustion catalyst to burn carbon from combustion and exhaust spaces, including catalytic convertors and turbo chargers. It also removes hard carbon build up on pistons and cylinder bores, restoring cylinder compression – it de-glazes cylinders without needing to rebuild the engine!
- Flushing Oil Concentrate – this unique product totally removes oil contaminants, including sludge, soot and other particles that act as heat-retaining, abrasive, component destroying substances, including hard carbon buildup that could only be chiseled off during a rebuild! It opens up oil galleries allowing oil to do its job – lubricate, cool and clean! And, it frees sticking piston rings! Assists in fixing engine blow-by. Use it at the time of engine oil change.
Suitable for both gasoline and diesel engines.
This Value Pack is available in 5 different size combinations:
Mini Pack contains –
- 8 fl oz of Cleanpower
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of Flushing Oil Concentrate
This pack has been developed to suit most small to medium vehicles or machines with engines up to approximately 6.0 liter engine capacity (370 cubic inch), and having up to approximately 16 quarts (4 gallons/19 liters) of engine oil capacity. Typical vehicles/machines include cars and SUV’s, 4-Wheel drives, small pick-up trucks, small agricultural tractors, small marine engines, etc.
Mini Plus Pack contains –
- 16 fl oz of Cleanpower
- 64 fl oz of FTC Decarbonizer
- 16 fl oz of Flushing Oil Concentrate
This pack has been developed to suit most medium vehicles or machines with engines up to approximately 9.0 liter engine capacity (550 cubic inch), and having up to approximately 32 quarts (8 gallons/38 liters) of engine oil capacity. Typical vehicles/machines include 4-Wheel drives, many medium diesel powered pick-up trucks, RVs, small to medium agricultural tractors, medium marine engines, etc.
Small Pack contains –
- 32 fl oz of Cleanpower
- 1 gallon of FTC Decarbonizer
- 32 fl oz of Flushing Oil Concentrate
This pack has been developed to suit most large vehicles or machines with engines over 9.0 liter engine capacity (over 550 cubic inch), and having up to approximately 64 quarts (16 gallons/76 liters) of engine oil capacity. Typical vehicles/machines include large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, large agricultural tractors, large marine engines, etc.
Medium Pack contains –
- 64 fl oz of Cleanpower
- 2 gallons of FTC Decarbonizer
- 32 fl oz of Flushing Oil Concentrate
This pack is most suitable for trucks etc. that cover a lot of miles relatively quickly, e.g. long distance OTR Truckers. The 2 gallons of FTC Decarbonizer and 64 fl oz of Cleanpower keeps these trucks on the road for a long period of time without needing to reorder as often, allowing for the full benefit of the ongoing de-carbonizing effect, ultimately removing all engine-destroying hard carbon from the combustion chamber, and promoting more efficient long-term engine performance.
Large Pack contains –
- 1 gallon Cleanpower
- 4 gallons of FTC Decarbonizer
- 64 fl oz of Flushing Oil Concentrate
This pack is suitable for small fleet operators with up to 3 or 4 trucks or other equipment, or a combination of different types of machines, e.g. truck, excavator, dozer, crane, boat, etc.
32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Not sure which pack size to get? Choose the most appropriate Stop Smoke Diesel Pack size for your particular need – Mini, Mini Plus, Small, Medium or Large Pack
The Stop Smoke Diesel Pack contains these 3 heavy duty, very effective products –
- ULS Diesel Enhancer – the ultimate in cleaning complete diesel fuel systems. It removes fouling deposits in fuel injectors, even stubborn ones, that most “off the shelf” products won’t touch. It eliminates engine rough idle and provides smoother operation throughout the full rev-range. It contains an upper cylinder lubricant to keep cylinders and pistons cooler, all the while reducing wear. ULS Diesel Enhancer is the perfect solution to the low lubricity problems faced by Ultra Low Sulfur Diesel fuel used in modern common rail diesel engines!
- FTC Decarbonizer – acts as a truly unique and effective combustion catalyst to burn carbon from combustion and exhaust spaces, including catalytic convertors, Diesel Particulate Filters, Exhaust Gas Recirculation Valves and turbo chargers. It also removes hard carbon build up on pistons and cylinders – restoring cylinder compression – it de-glazes cylinder bores without needing to rebuild the engine!
- Flushing Oil Concentrate – a heavy duty, solvent-free engine flush concentrate allows operators to restore full cleanliness to the entire crankcase, safely removing all engine sludge and freeing sticking piston rings to restore cylinder compression, and control engine blow-by and exhaust smoke. Use it at time of engine oil change.
This Value Pack is available in 5 different size combinations:
Mini Pack contains –
- 8 fl oz of ULS Diesel Enhancer
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of Flushing Oil Concentrate
This pack has been developed to suit most small to medium diesel powered vehicles or machines with engines up to approximately 6.0 liter engine capacity (370 cubic inch), and having up to approximately 16 quarts (4 gallons/19 liters) of engine oil capacity. Typical vehicles/machines include diesel powered cars and SUV’s, 4-Wheel drives, small diesel powered pick-up trucks, small agricultural tractors, small marine engines, etc.
Mini Plus Pack contains –
- 16 fl oz of ULS Diesel Enhancer
- 64 fl oz of FTC Decarbonizer
- 16 fl oz of Flushing Oil Concentrate
This pack has been developed to suit most medium diesel powered vehicles or machines with engines up to approximately 9.0 liter engine capacity (550 cubic inch), and having up to approximately 32 quarts (8 gallons/38 liters) of engine oil capacity. Typical vehicles/machines include diesel powered 4-Wheel drives, many medium diesel powered pick-up trucks, RVs, small to medium agricultural tractors, medium marine engines, etc.
Small Pack contains –
- 32 fl oz of ULS Diesel Enhancer
- 1 gallon of FTC Decarbonizer
- 32 fl oz of Flushing Oil Concentrate
This pack has been developed to suit most large diesel powered vehicles or machines with engines over 9.0 liter engine capacity (over 550 cubic inch), and having up to approximately 64 quarts (16 gallons/76 liters) of engine oil capacity. Typical vehicles/machines include large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, large agricultural tractors, large marine engines, etc.
Medium Pack contains –
- 64 fl oz of ULS Diesel Enhancer
- 2 gallons of FTC Decarbonizer
- 32 fl oz of Flushing Oil Concentrate
This pack is most suitable for diesel powered trucks etc. that cover a lot of miles relatively quickly, e.g. long distance OTR Truckers. The 2 gallons of FTC Decarbonizer and 64 fl oz of ULS Diesel Enhancer keeps these trucks on the road for a long period of time without needing to reorder as often, allowing for the full benefit of the ongoing de-carbonizing effect, ultimately removing all engine-destroying hard carbon from the combustion chamber, and promoting more efficient long-term engine performance.
Large Pack contains –
- 1 gallon ULS Diesel Enhancer
- 4 gallons of FTC Decarbonizer
- 64 fl oz of Flushing Oil Concentrate
This pack is suitable for small fleet operators with up to 3 or 4 diesel powered trucks or other equipment, or a combination of different types of machines, e.g. truck, excavator, dozer, crane, boat, etc.
This Pack is suitable for diesel engines only.
32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Not sure which pack size to get? Choose the most appropriate size Gasoline Performance Pack for your particular need – Mini, Small, Medium or Large Pack.
This Performance Pack contains these 3 extremely effective products that increase engine and transmission efficiency and power, while significantly reducing maintenance costs over the life of the vehicle or machine –
- AW10 Antiwear delivers tremendous increases in lubricant load carrying ability, wear reduction and friction/heat reduction!
- FTC Decarbonizer acts as a combustion catalyst to burn carbon from combustion and exhaust spaces, turbos and EGR’s, burning fuel faster, easier and cleaner!
- Cleanpower is a super concentrated product, remarkably effective as a complete fuel system and injector cleaner. Most injectors don’t need replacing … Just a thorough clean!
This Value Pack is available in 4 different size combinations:
Mini Pack contains 
- 16 fl oz of AW10 Antiwear
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of Cleanpower
This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and small to medium oil capacity in engines, transmissions, differentials etc. Typical vehicles/machines include cars and SUV’s, 4-wheel drives, small to medium pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.
Small Pack contains –
- 32 fl oz of AW10 Antiwear
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of Cleanpower
This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and medium oil capacity in engines and transmissions/differentials/transfer cases, etc. Typical vehicles/machines include 4-wheel drives, medium pick-up trucks, small to medium agricultural tractors, Bobcats/skidsteers, small to medium off-highway vehicles and machines, etc.
Medium Pack contains –
- 32 fl oz of AW10 Antiwear
- 64 fl oz of FTC Decarbonizer
- 16 fl oz of Cleanpower
This pack has been developed to suit most medium to large vehicles/machines with engines up to approximately 9.0-liter engine displacement (550 cubic inch), with larger engine and transmission/differential oil capacities, etc. Typical vehicles/machines include box trucks, medium agricultural tractors and similar off-highway machines and equipment, medium cranes, road construction machines, etc.
Large Pack contains –
- 1 gallon of AW10 Antiwear
- 1 gallon of FTC Decarbonizer
- 32 fl oz of Cleanpower
This pack has been developed to suit most large vehicles/machines with engines over 9.0-liter engine displacement (over 550 cubic inch), with large engine and transmission oil capacities, and multiple differentials, final drives, etc. Typical vehicles/machines include large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, large agricultural tractors and similar machines, etc.
32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Not sure which pack size to get? Choose the most appropriate Diesel Performance Pack size for your particular need – Mini, Small Pack, Medium or Large Pack.
This Diesel Only performance pack contains these 3 extremely effective products that increase engine and transmission efficiency and power, whilst significantly reducing maintenance costs over the life of the vehicle or machine –
- AW10 Antiwear – formulated to deliver tremendous increases in lubricant load carrying ability, wear reduction and friction/heat reduction.
- FTC Decarbonizer – acts as a combustion catalyst to burn carbon from combustion and exhaust spaces, turbos and DPF’s, burning fuel faster, easier and cleaner!
- ULS Diesel Enhancer – an extremely effective fuel system treatment for all diesel powered engines, and effectively overcomes most problems associated with Low-Sulfur Diesel fuel and modern, high pressure diesel fuel injector systems.
This Value Pack is available in 4 different size combinations:
Mini Pack contains –
- 16 fl oz of AW10 Antiwear
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of ULS Diesel Enhancer
This pack has been developed to suit most small to medium diesel-powered vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and small to medium oil capacity in engines, transmissions, differentials etc. Typical vehicles/machines include diesel-powered cars and SUV’s, 4-wheel drives, small to medium diesel-powered pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.
Small Pack contains –
- 32 fl oz of AW10 Antiwear
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of ULS Diesel Enhancer
This pack has been developed to suit most small to medium diesel-powered vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and medium oil capacity in engines and transmissions/differentials/transfer cases, etc. Typical vehicles/machines include diesel-powered 4-wheel drives, medium diesel-powered pick-up trucks, small to medium agricultural tractors, Bobcats/skidsteers, small to medium off-highway vehicles and machines, etc.
Medium Pack contains –
- 32 fl oz of AW10 Antiwear
- 64 fl oz of FTC Decarbonizer
- 16 fl oz of ULS Diesel Enhancer
This pack has been developed to suit most medium to large diesel-powered vehicles/machines with engines up to approximately 9.0-liter engine displacement (550 cubic inch), with larger engine and transmission/differential oil capacities, etc. Typical vehicles/machines include diesel-powered box trucks, medium agricultural tractors and similar off-highway machines and equipment, medium cranes, road construction machines , etc.
Large Pack contains –
- 1 gallon of AW10 Antiwear
- 1 gallon of FTC Decarbonizer
- 32 fl oz of ULS Diesel Enhancer
This pack has been developed to suit most large diesel-powered vehicles/machines with engines over 9.0-liter engine displacement (over 550 cubic inch), with large engine and transmission oil capacities, and multiple differentials, final drives, etc. Typical vehicles/machines include large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, large agricultural tractors and similar machines, etc.
This Pack is suitable for diesel powered vehicles/machines only.
32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Not sure which pack size to get? Choose the most appropriate size Ultimate Gasoline Pack for your particular need.
The Ultimate Gasoline Pack contains AW10 Antiwear, FTC Decarbonizer, Cleanpower, Flushing Oil Concentrate, and RMI-25 Cooling System Treatment. It is designed as a whole-of-vehicle pack; it is the ultimate in safeguarding your vehicle or machine against increased stress and wear on all major components, including all lubricated parts (including engine, transmission/driveline, and power steering). It also restores and cleans the complete fuel system (fuel pump, injectors, carburetors, fuel lines), combustion spaces and exhaust system (turbocharger, catalytic converter, oxygen sensors, etc). And RMI-25 is a total pour in/drive-away system which extends antifreeze effectiveness, cleans rust and scale, and prevents water pump and radiator failure.
This combination of products is designed to restore and maintain ‘like-new’ performance, and significantly increase the service life of the vehicle or machine.
This Value Pack is available in 5 different size combinations:
Mini Pack contains –
- 16 fl oz of AW10 Antiwear
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of Cleanpower
- 8 fl oz of Flushing Oil Concentrate
- 8 fl oz of RMI-25 Cooling System Treatment
This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and small to medium oil capacity in engines, transmissions, differentials etc. Typical vehicles/machines include cars and SUV’s, 4-wheel drives, small to medium pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.
Mini Plus Pack contains –
- 32 fl oz of AW10 Antiwear
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of Cleanpower
- 8 fl oz of Flushing Oil Concentrate
- 8 fl oz of RMI-25 Cooling System Treatment
This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and medium oil capacity in engines and transmissions/differentials/transfer cases, etc. Typical vehicles/machines include 4-wheel drives, medium pick-up trucks, small to medium agricultural tractors, Bobcats/skidsteers, small to medium off-highway vehicles and machines, etc.
Small Pack contains –
- 32 fl oz of AW10 Antiwear
- 64 fl oz of FTC Decarbonizer
- 16 fl oz of Cleanpower
- 16 fl oz of Flushing Oil Concentrate
- 16 fl oz of RMI-25 Cooling System Treatment
This pack has been developed to suit most medium to large vehicles/machines with engines up to approximately 9.0-liter engine displacement (550 cubic inch), with larger engine and transmission/differential oil capacities, etc. Typical vehicles/machines include box trucks, medium agricultural tractors and similar off-highway machines and equipment, medium cranes, road construction machines, etc.
Medium Pack contains –
- 1 gallon of AW10 Antiwear
- 1 gallon of FTC Decarbonizer
- 32 fl oz of Cleanpower
- 16 fl oz of Flushing Oil Concentrate
- 32 fl oz of RMI-25 Cooling System Treatment
This pack has been developed to suit some larger vehicles/machines with engines over approximately 9.0-liter engine displacement (550 cubic inch),with medium to large engine, transmission/differential and hydraulic oil capacities. Typical vehicles/machines might include roadwork machines, dump trucks, some onsite construction machines, heavy duty off-road machines, some medium to large agricultural machines etc.
Large Pack contains –
- 1 gallon of AW10 Antiwear
- 1 gallon of FTC Decarbonizer
- 32 fl oz of Cleanpower
- 32 fl oz of Flushing Oil Concentrate
- 32 fl oz of RMI-25 Cooling System Treatment
This pack has been developed to suit large vehicles/machines with engines over 9.0 liter engine displacement (over 550 cubic inch), with large transmissions, multiple large differentials, final drives, and hydraulic systems. Typical vehicles/machines include large heavy duty, hard-working vehicles and machinery, e.g. 18-Wheelers, large dump trucks, cement trucks, earthmoving and excavating machinery, large agricultural tractors etc.
(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Not sure which pack size to get? Choose the most appropriate Ultimate Diesel Pack size for your particular need – Mini, Mini Plus, Small, Medium or Large Pack.
The Ultimate Diesel Pack contains AW10 Antiwear, FTC Decarbonizer, ULS Diesel Enhancer, Flushing Oil Concentrate, and RMI-25 Cooling System Treatment. It is designed as a whole-of-vehicle pack; it is the ultimate in safeguarding your diesel-powered vehicle or machine against increased stress and wear on all major components, including all lubricated parts (comprising engine, transmission, differential, final drive, power steering and hydraulics), It also restores and cleans the complete fuel system (fuel pump, injectors, fuel lines), combustion spaces and exhaust system (turbocharger, diesel oxidation catalyst, Diesel Particulate Filter, emission sensors, etc). And RMI-25 is a total pour in/drive-away system which extends antifreeze effectiveness, cleans rust and scale, and prevents water pump and radiator failure.
This combination of products is designed to restore or maintain ‘like-new’ performance, and significantly increase the service life of the vehicle or machine and its components.
This Value Pack is available in 5 different size combinations:
Mini Pack contains –
- 16 fl oz of AW10 Antiwear
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of ULS Diesel Enhancer
- 8 fl oz of Flushing Oil Concentrate
- 8 fl oz of RMI-25 Cooling System Treatment
This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and small to medium oil capacity in engines, transmissions, differentials etc. Typical vehicles/machines include cars and SUV’s, 4-wheel drives, small to medium pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.
Mini Plus Pack contains –
- 32 fl oz of AW10 Antiwear
- 32 fl oz of FTC Decarbonizer
- 8 fl oz of ULS Diesel Enhancer
- 8 fl oz of Flushing Oil Concentrate
- 8 fl oz of RMI-25 Cooling System Treatment
This pack has been developed to suit most small to medium vehicles/machines with engines up to approximately 6.0-liter engine displacement (370 cubic inch), and medium oil capacity in engines and transmissions/differentials/transfer cases, etc. Typical vehicles/machines include 4-wheel drives, medium pick-up trucks, small to medium agricultural tractors, Bobcats/skidsteers, small to medium off-highway vehicles and machines, etc.
Small Pack contains –
- 32 fl oz of AW10 Antiwear
- 64 fl oz of FTC Decarbonizer
- 16 fl oz of ULS Diesel Enhancer
- 16 fl oz of Flushing Oil Concentrate
- 16 fl oz of RMI-25 Cooling System Treatment
This pack has been developed to suit most medium to large vehicles/machines with engines up to approximately 9.0-liter engine displacement (550 cubic inch), with larger engine and transmission/differential oil capacities, etc. Typical vehicles/machines include box trucks, medium agricultural tractors and similar off-highway machines and equipment, medium cranes, road construction machines, etc.
Medium Pack contains –
- 1 gallon of AW10 Antiwear
- 1 gallon of FTC Decarbonizer
- 32 fl oz of ULS Diesel Enhancer
- 16 fl oz of Flushing Oil Concentrate
- 32 fl oz of RMI-25 Cooling System Treatment
This pack has been developed to suit some larger vehicles/machines with engines over approximately 9.0-liter engine displacement (550 cubic inch), with medium to large engine, transmission/differential and hydraulic oil capacities. Typical vehicles/machines might include roadwork machines, dump trucks, some onsite construction machines, heavy duty off-road machines, some medium to large agricultural machines etc.
Large Pack contains –
- 1 gallon of AW10 Antiwear
- 1 gallon of FTC Decarbonizer
- 32 fl oz of ULS Diesel Enhancer
- 32 fl oz of Flushing Oil Concentrate
- 32 fl oz of RMI-25 Cooling System Treatment
This Pack is suitable for diesel engines only.
(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Not sure which Pack size to get? Choose the most appropriate size Flushing Oil Concentrate & Cleanpower Value Pack for your particular need – Mini, Mini Plus, Small, Medium or Large Pack.
These 2 products do an incredible job of restoring to ‘like new’ major components of the vehicle’s engine and fuel supply system. Reinvigorate your entire engine – remove sludge and hard carbon from from all oil-wetted parts of the engine with Flushing Oil Concentrate, and restore power and performance by thoroughly cleaning the fuel system – injectors and fuel pump, with Cleanpower super concentrated fuel treatment!
This Value Pack is available in 5 different size combinations:
Mini Pack contains –
- 8 fl oz of Flushing Oil Concentrate
- 8 fl oz of Cleanpower
This Pack is ideal for smaller vehicles/engines with an engine oil capacity of up to 16 quarts (4 gallons/19 liters). Typical vehicles for this Pack could include small to medium passenger cars, SUV’s, 4-Wheel drives, small light trucks, small agricultural tractors, Bobcats/skidsteers, small marine engines etc.
Mini Plus Pack contains –
- 16 fl oz of Flushing Oil Concentrate
- 16 fl oz of Cleanpower
This Pack works well with most medium vehicles/machines having up to approximately 32 quarts (8 gallons/38 liters) of engine oil capacity. Typical vehicles/machines for this Pack might include many medium to large pick-up trucks, RVs, box trucks, medium agricultural tractors, medium marine engines, etc. A good Pack if you have a number of small vehicles or machines.
Small Pack contains –
- 32 fl oz of Flushing Oil Concentrate
- 32 fl oz of Cleanpower
This Pack has been developed to suit large vehicles/machines with an engine oil capacity of up to 64 quarts (16 gallons/76 liters). Typical vehicles/machines for this Pack can include large heavy duty, hard-working vehicles and machinery, e.g. 18-Wheelers, large dump trucks, cement trucks, earthmoving and excavating machinery, large agricultural tractors etc. This Pack might also be beneficial if you have a number of medium to large vehicles and machines.
Medium Pack contains –
- 64 fl oz of Flushing Oil Concentrate
- 64 fl of Cleanpower
This Pack is designed for a small fleet of vehicles and machines. The fleet could include a number of vehicles, machines, boats etc, such as roadwork machines, dump trucks, some onsite construction machines, heavy duty off-road machines, some medium to large agricultural machines, etc. These products in the Pack could be shared among the various machines.
Large Pack contains –
- 1 gallon of Flushing Oil Concentrate
- 1 gallon of Cleanpower
This Pack is designed for larger operations, including fleet operators or workshops, etc. 3 or 4 trucks or other equipment, or a combination of different types of machines, e.g. truck, excavator, dozer, crane, boat, etc
32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Not sure which pack size to get? Choose the most appropriate Flushing Oil Concentrate & ULS Diesel Enhancer Value Pack size for your particular need – Mini, Mini Plus, Small, Medium or Large Pack.
These 2 products in this Diesel-Only Value Pack do an incredible job of restoring to ‘like new’ major components of the vehicle’s engine and fuel supply system. Reinvigorate your entire diesel engine – remove sludge and hard carbon from from all oil-wetted parts of the engine with Flushing Oil Concentrate, and restore power and performance by thoroughly cleaning the fuel system – injectors and fuel pump, with ULS Diesel Enhancer diesel fuel treatment!
This Value Pack is available in 5 different size combinations:
Mini Pack contains –
- 8 fl oz of Flushing Oil Concentrate
- 8 fl oz of ULS Diesel Enhancer
This Pack is ideal for smaller diesel-powered vehicles/engines with an engine oil capacity of up to 16 quarts (4 gallons/19 liters). Typical vehicles for this Pack could include small to medium passenger diesel-powered cars, SUV’s, 4-Wheel drives, small light trucks, small agricultural tractors, Bobcats/skidsteers, small marine engines etc.
Mini Plus Pack contains –
- 16 fl oz of Flushing Oil Concentrate
- 16 fl oz of ULS Diesel Enhancer
This Pack works well with most medium diesel-powered vehicles/machines having up to approximately 32 quarts (8 gallons/38 liters) of engine oil capacity. Typical vehicles/machines for this Pack might include many medium to large diesel-powered pick-up trucks, RVs, box trucks, medium agricultural tractors, medium marine engines, etc. A good Pack if you have a number of small vehicles or machines.
Small Pack contains –
- 32 fl oz of Flushing Oil Concentrate
- 32 fl oz of ULS Diesel Enhancer
This Pack has been developed to suit large diesel-powered vehicles/machines with an engine oil capacity of up to 64 quarts (16 gallons/76 liters). Typical vehicles/machines for this Pack can include large heavy duty, hard-working diesel-powered vehicles and machinery, e.g. 18-Wheelers, large dump trucks, cement trucks, earthmoving and excavating machinery, large agricultural tractors etc. This Pack might also be beneficial if you have a number of medium to large vehicles and machines.
Medium Pack contains –
- 64 fl oz of Flushing Oil Concentrate
- 64 fl of ULS Diesel Enhancer
This Pack is designed for a small fleet of diesel-powered vehicles and machines. The fleet could include a number of vehicles, machines, boats etc, such as diesel-powered roadwork machines, dump trucks, some onsite construction machines, heavy duty off-road machines, some medium to large agricultural machines, etc. These products in the Pack could be shared among the various machines.
Large Pack contains –
- 1 gallon of Flushing Oil Concentrate
- 1 gallon of ULS Diesel Enhancer
This Pack is designed for larger operations, including fleet operators or workshops, etc. 3 or 4 diesel-powered trucks or other equipment, or a combination of different types of diesel-powered machines, e.g. truck, excavator, dozer, crane, boat, etc.
This Pack is suitable for diesel engines only.
(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
Not sure which pack size to get? Choose the most appropriate size Overheating Value Pack for your particular need – Mini, Small, Medium or Large Pack.
The pack contains –
RMI-25 Cooling System Treatment – a very low-cost, extremely effective defense against cooling system failure in all engines. It is a total pour in/drive-away system which extends antifreeze effectiveness, increases water filter longevity, and has no disposal costs when used with water only.
AW10 Antiwear provides a massive strength increase to engine, transmission and hydraulic oils. In doing so, there is a huge reduction in frictional heat generation allowing components to remain much cooler.
The Flushing Oil Concentrate in this pack dissolves and suspends contaminants and sludge, allowing lubricating oil to flow more freely – dissipating heat and effectively resulting in cooler running temperatures and longer service life. Use at time of oil change.
This Value Pack is available in 4 different size combinations:
Mini Pack contains –
- 8 fl oz RMI-25
- 16 fl oz AW10 Antiwear
- 8 fl oz Flushing Oil Concentrate
This pack has been developed to suit most small to medium vehicles/machines having up to approximately 16 quarts (4 gallons/19 liters) of engine oil capacity, and larger capacity transmissions and multiple differentials. 8 fl oz of RMI-25 will treat up to 5 gallons cooling system capacity. Typical vehicles/machines include most passenger cars, 4-wheel drives, many small to medium size pick-up trucks, small agricultural tractors, Bobcats/skidsteers, and similar machines, etc.
Small Pack contains –
- 8 fl oz RMI-25
- 32 fl oz AW10 Antiwear
- 8 fl oz Flushing Oil Concentrate
This Pack is cost effective and suitable for medium vehicles/engines with an engine oil capacity of up to 16 quarts (4 gallons/19 liters). With this Pack, these vehicles or machines can achieve numerous engine oil flushes with the Flushing Oil Concentrate (depending, of course, on engine oil capacity) and have enough AW10 Antiwear to treat the entire oil-lubricated parts of the vehicle – engine, transmission/transaxle, differentials, and transfer case if applicable. 8 fl oz of RMI-25 will treat up to 5 gallons cooling system capacity. Not only is this Pack particularly popular with many Four-Wheel Drive enthusiasts who often push their vehicles to the limits in extremely harsh conditions, but it is a ‘must-have‘ for operators of medium size pick-up trucks that regularly tow large trailers and 5th wheels. These products really help keep temperatures under control in the engine, transmission (automatic or manual) and differentials, and ensure reliable performance under very heavy working conditions! Typical vehicles/machines include many medium size pick-up trucks, medium size agricultural machines and other off-road vehicles, and similar machines, etc.
Medium Pack contains –
- 16 fl oz RMI-25
- 32 fl oz AW10 Antiwear
- 16 fl oz Flushing Oil Concentrate
This Pack can adequately treat a wide variety of vehicles and machines. There is enough RMI-25 to treat a cooling system up to 8 gallons, and enough Flushing Oil Concentrate to adequately flush up to 32 quarts (8 gallons/38 liters) engine oil capacity, and enough AW10 Antiwear to treat a combination of engines, transmissions, differentials, final drives, and hydraulics on many heavy duty, hardworking vehicles and machines.
Large Pack contains –
- 32 fl oz RMI-25
- 1 gallon AW10 Antiwear
- 32 fl oz Flushing Oil Concentrate
This very popular Pack is just right for all larger vehicles/engines with an engine oil capacity of up to 64 quarts (16 gallons/76 liters), and large capacity transmissions (automatic or manual), differentials, final drives, transfer cases, and hydraulics. This Pack is appropriate for large heavy duty, hard-working vehicles and machinery, e.g. full-size trucks, 18-Wheelers, earthmoving and excavating machinery, cranes, large off-road machines, construction vehicles, etc.
(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)
RMI-25 Cooling System Treatment
is a very low-cost, extremely effective defense against cooling system failure in all liquid cooled engines. It is a total pour in/drive-away system which removes rust, scale and corrosion, prolongs component life, prevents water pump and radiator failures.
- Cleans radiators, engine blocks, heater cores, hoses
- Inhibits rust, mineral deposits, erosion, pitting
- Lubricates water pump seals, heater control valves, thermostats
- Conditions coolant for better heat transfer
Find out more…
Yes! Among a host of other things, RMI-25 Cooling System Treatment restores the rust/corrosion inhibitor additives of the antifreeze/coolant that have degraded over time and have lost their ability to prevent rust and corrosion in the system. The inherent ‘freeze up’ protection properties of the antifreeze do not degrade, and remain viable. Find out more …
You will see corrosion material floating on the surface of the coolant fluid at the radiator cap neck or in the coolant recovery tank. It can be flushed away by overflowing the radiator at the cap or coolant recovery tank. In extremely rusted systems in which rust penetration has occurred, good cleaning action may reveal a leak. Quality stop-leak is recommended to seal such openings. If the leak persists, see a radiator specialist for mechanical intervention. Find out more…
The rust, mineral, and other deposits that RMI-25 Cooling System Treatment dissolves become a soft floating harmless material in the cooling liquid. These deposits are purged from the system into the coolant recovery tank. On large diesel engines the deposits are safely caught in the coolant filter, where they can be manually removed when the filter is replaced. Where no recovery tank or filter is used, it may be necessary to drain the radiator. Find out more …
Yes! Over 60% of water pump failures are caused by seal leakage. Normally, granulated rust and minerals circulate in the cooling system, acting as a grinding compound on your water pump seal and shaft, ultimately resulting in water pump failure. RMI-25 Cooling System Treatment dissolves these granules into a soft harmless matter, and as the engine operates, the dissolved solids will safely purge out of the system and into the coolant recovery tank (if fitted). Find our more…
Yes! RMI-25 Cooling System Treatment contains an active, concentrated Oxygen Scavenger component that binds the dissolved oxygen in an inert chemical reaction and eliminates it. This distinct action greatly reduces the potentially catastrophic damage caused by cavitation corrosion – the source of cylinder liner pitting. Find out more…
RMI-25 Cooling System Treatment
is compatible with all types of antifreeze, including high- and low-silicate types of antifreeze. RMI-25 can be used in all types of radiators and is safe for all metal, metal finishes, and aluminum engines. RMI-25 is especially recommended for all types of ‘water wetters’. Find out more…
Yes it is! RMI-25 Cooling System Treatment is a perfect Supplemental Coolant Additive!
What is a Supplemental Coolant Additive (SCA)?
SCAs, or Supplemental Coolant Additives, are solutions added to the coolant stream to provide, as the name suggests, supplemental anti-corrosion and cavitation (or liner pitting) protection for diesel engines having pressed-in wet sleeve cylinders. Liner pitting is a significant and very costly problem in heavy-duty diesel-engine vehicles.
SCA is required in all diesel engines with wet sleeves (press in cylinder liners). We recommend RMI-25 Cooling System Treatment as an SCA for all diesel and gasoline engine cooling systems, whether they have wet sleeve liners or not. SCA should be added to your antifreeze solution based on diagnostic testing results.
Other, conventional SCAs, which contain silicate, borate/nitrite or molybdate/nitrite/phosphate are designed to inhibit cavitation, erosion, corrosion, and scale formation. These conventional additives can be applied in a few ways; either bottled liquid added directly to the cooling system via the radiator or coolant recovery tank, or via a SCA coolant filter, or both. In these instances, testing for proper SCA content must be done on a regularly scheduled basis and the proper amount of conventional SCA added as needed, based on cooling system capacity and test results.
Note: Other SCAs do not contain a cleaner, and their inherent rust and oxidation inhibitor will only work effectively in a clean system. Many users of conventional SCA’s often overdose their contaminated cooling system in an attempt to increase its effectiveness. The overdose issue results in an overcharged system and can cause cooling system problems (green goo/additive dropout and solder bloom). This is the reason a test MUST BE DONE and the proper amount of SCA must be used. But the issue of an unclean cooling system remains…
RMI-25 contains a very effective system cleaner and does not use silicates, borates, nitrites, or molybdate/nitrite/phosphate chemistry which are found in most SCAs. These elements can be harmful to the environment, and used conventional SCA coolant/antifreeze must be managed as a hazardous waste. RMI-25 eliminates the many problems which may occur with products using these chemicals in their formulation. Find out more…
RMI-25 does not have an exact shelf life. If the bottle remains sealed, the product stays perfectly viable for over a year. Once the bottle is opened, it may slowly lose it’s effectiveness – primarily the oxygen scavenger component. It may also thicken as time progresses, though this isn’t a problem as it dilutes with the coolant or cooling system water. Using older RMI-25 will not be harmful in any way, but it just may not work as well as newer product.
How do I use RMI-25?
Very simply! Pour the recommended dose of RMI-25 into the radiator and run the engine. You may have to remove some coolant/antifreeze to allow the space for the required amount of RMI-25. Radiator draining and refilling are usually not required.
How quickly does RMI-25 work?
When added to coolant at the recommended dose rate, RMI-25 will clean dirty and corroded cooling systems in about 15 hours of normal operation.
How often do I check RMI-25 in my cooling system?
It’s important to test the pH level and if necessary, re-treat your cooling system with RMI-25 every 15,000 miles (24,000 Km) or 300 hours. pH levels should be set between 8.2 – 10. Test with pH strips. Add RMI-25 if acidic.
Can I add too much RMI-25 to Antifreeze?
If RMI-25 is added from time to time to ensure the correct pH level of the cooling system is maintained, the freeze point of the antifreeze may be affected by the dilution. It is recommended to check the freeze point during routine maintenance procedures.
Does RMI-25 extend cooling system longevity?
Yes! There is nothing you can get on the market today that does a better job of keeping the cooling system 100% efficient; extending the life of all system components, and reducing maintenance and repair costs than RMI-25.
How much RMI-25 do I use in racing applications?
When freezing protection is not needed, mix 32-64 fl oz of RMI-25 with distilled water, depending on cooling system capacity and engine horsepower.
Can I use RMI-25 with intercooling systems for superchargers?
Absolutely! RMI-25 works great, and will protect the whole intercooling system and it will run cooler. It’s recommended starting with 8 fl oz of RMI-25 and possibly more with bigger capacity cooling systems.
Does RMI-25 change my maintenance schedule on coolant?
Yes! Adding RMI-25 is like recycling or recharging the coolant without having to first drain it from the system and then refill the entire cooling system with expensive new coolant/antifreeze.
Is it OK to treat new coolant with RMI-25?
Yes! Remember, coolant has no cleaning action, and by using RMI-25, it gives you that extra edge, as well as all the other benefits that come with it.
I have a new vehicle. Is there any advantage to using RMI-25?
Yes! Adding RMI-25 to the cooling system of a new vehicle will provide greater protection against deposit buildup, will remove foundry rust and deposits, and promote much greater heat transfer from the metal engine components into the liquid coolant.
I don’t know how old my antifreeze is, what should I do?
In this situation, it is best to change it. Refill the cooling system with new antifreeze/coolant and add RMI-25 at the appropriate rate. If antifreeze is not required, use distilled or de-mineralized water and add RMI-25 at the appropriate rate.
Can I use RMI-25 with water only?
Yes! Be sure you use distilled or mineral free water mixed with RMI-25 in your cooling system. Using normal water is a huge No-No, as normal water usually contains a lot of minerals that rapidly accelerate the corrosion process within the cooling system.
Does RMI-25 clean so well it can create leaks in the system?
Sometimes. This may happen if the cooling system has been seriously neglected and is on the edge of failure.
Is RMI-25 safe to handle?
Yes, RMI-25 is NON-TOXIC, NON-HAZARDOUS and BIODEGRADABLE. RMI-25 is safe to use with all metals, plastics, hoses, and seals. It is compatible with all types of antifreeze/coolant solutions and metal-based stop leaks.
What are other uses for RMI-25?
RMI-25 can be used in heating systems that use hot water.
Find out more…
Unlike other cooling systems treatments, it is impossible to put too much RMI-25 Cooling System Treatment in your radiator. Theoretically, you could run 100% RMI-25 in your radiator and the only difference would be quicker results. In practice though, most cooling systems usually require an antifreeze component sufficient to effectively reduce the freezing point of the coolant in cold climate areas.
Add RMI-25 Cooling System Treatment directly to the engine’s cooling system’s radiator.
It is recommended to add 8 fl oz of RMI-25 for a cooling system with a capacity up to 5 gallons/19 Liters.
For cooling systems above 5 gallons, it is recommended to use a minimum treatment of 2 fl oz per gallon of coolant capacity. When used with distilled water only, and no antifreeze, it is recommended to double this treatment rate, i.e. 4 fl oz per gallon.
Select the most appropriate size RMI-25 for your particular need. Identify your engine’s coolant capacity and choose from the various size options available –
- 8 fl oz – can treat up to 5 gallons (19 litres). This is usually enough to treat regular cars, small pickup trucks, small agricultural tractors & machinery, commercial generators, etc.
- 16 fl oz – can treat up to 8 gallons (30 liters). This is usually enough to treat medium to some larger pickup trucks, and similar sized agricultural and other off-road machines.
- 32 fl oz – can treat up to 16 gallons (60 liters). This is usually enough to treat medium to large trucks, RVs, medium agricultural tractors & machinery, excavators, dozers, large ‘inboard’ motorboats, etc.
- 64 fl oz – can treat up to 32 gallons (120 liters). This is usually enough to treat larger trucks, agricultural tractors, and other similar large machinery etc, large commercial generators, or a combination of several different engines.
- 1 gallon – can treat up to 64 gallons (240 liters). This is usually enough to treat several large trucks & machinery, combinations of various vehicles, earthmovers, motorboats, truck or machinery fleets, etc.
Test cooling system pH level every 15,000 miles (24,000 Km) or 300 hours, and if necessary, re-treat the cooling system with RMI-25. Correct pH is 8.2 – 10. Simply use pH Test Strips to test.
Engines requiring antifreeze in the cooling system should have the ‘freeze point’ of the cooling system fluid checked during regular maintenance schedules.
STORE ABOVE FREEZING 32°F (0°C)
(32 fl oz = 946 mL, 1 liter = 33.8 fl oz)